Primary User Manual

Using the fader function

(1) When fading in [a]

In the standby mode, press FADER until the desired fader indicator flashes.

When fading out [b]

In the recording mode, press FADER until the desired fader indicator flashes.

The indicator changes as follows:

FADER t M.FADER t STRIPE t BOUNCE t MONOTONE t no

indicator

The last selected fader mode is indicated first of all.

(2) Press START/STOP. The fader indicator stops flashing.

To cancel the fader function

After the fade in/out is carried out : Your camcorder automatically returns to the

normal mode.

Before the fade in/out is carried out : Before pressing START/STOP, press FADER until

the indicator disappears.

The date, time indicator and title do not fade in or fade out

Erase them before operating the fader function if they are not needed.

While using the bounce function, you cannot use the following functions:

– Exposure

– Focus

– Zoom

– Picture effect

Note on the bounce function

The BOUNCE indicator does not appear in the following mode or functions:

– D ZOOM is set to the mode other than OFF in the menu settings

– Wide mode

– Picture effect

– PROGRAM AE

FADER