Primary User Manual

43
Customizing Your Camcorder
Resetting the date and time
The default clock setting is set to East Coast Standard Time.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While your camcorder is in the standby mode, press MENU to display the
menu.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the menu disappear. The time indicator appears.
2000 JAN 1
12 00
AM
SETUP MENU
[MENU] : END
2
4
SETUP MENU
CLOCK SET
AUTO DATE
LTR SIZE
DEMO MODE
1,
7
3
[MENU] : END
SETUP MENU
CLOCK SET
AUTO DATE
LTR SIZE
DEMO MODE
RETURN
6
SETUP MENU
[MENU] : END
[MENU] : END
SETUP MENU
MENU
CLOCK SET
AUTO DATE
LTR SIZE
DEMO MODE
RETURN
CLOCK SET
AUTO DATE
LTR SIZE
DEMO MODE
RETURN
CLOCK SET
AUTO DATE
LTR SIZE
DEMO MODE
RETURN
JAN 1 1999
12:00:00
AM
1999 JAN 1
12 00 AM
2000 JUL 4
5 30 PM
JUL 4 2000
5:30:00
PM
2000 JAN 1
12 00
AM