Primary User Manual

Getting started

Step 1 Preparing the power supply

Charging the battery pack

Use the battery pack after charging it for your camcorder.

Your camcorder operates only with the “InfoLITHIUM” battery pack (L series).

(1) Open the DC IN jack cover and connect the AC power adaptor supplied with

your camcorder to the DC IN jack with the plug’s v mark facing up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

(4) Set the POWER switch to OFF (CHARGE). Charging begins. The remaining

battery time is indicated in minutes on the display window.

When the remaining battery indicator changes to u, normal charge is completed. To

fully charge the battery (full charge), leave the battery pack attached for about 1 hour

after normal charge is completed until FULL appears in the display window. Fully

charging the battery allows you to use the battery longer than usual.

POWER

OFF

CAMERA

(CHARGE)

PLAYER