Manual

Reset the date and time using the DATE(+) and TIME(NEXT) buttons.
(1) Turn the POWER switch to CAMERA.
(2) Turn STANDBY up.
(3) Press DATE(* ) and TIME(NEXT) simultaneously until tile year indicator flashes in the viewfinder.
(4) Set year, monlh, day, time, minute by pressing DATE( * ) and TIME(NEXT) Note that when you keep
DATE(÷) pressed, the digits advance faster
1
OfF
2
DAq El*) rIME(NEXT)
DATE(+) TIME(NEXT)
DATE(+) TIME(NEXT)
DATE(e) TIME(NEXT)
DATE{+) TIME(NEXT}
DATE{+) TIME(NEXI)
9
r_
i-"
3
,2
0
o
To Correct the Date and Time Setting
Repeat steps 3 and 4.
To Check the Date and Time
Press DATE to display the date indicator in the viewfinder Press TIME to display the time indicator.
When you press the same buttort again, the indicator goes out.
The year indicator changes as follows:
'95 _ '96 ...........'24
t J
Note on the time indicator
The internal clock of the camcorcler operates on a 12-hour cycle.
12:00:00 AM stands for midnight,
12:00:00 PM stands for noon.
33