Manual

Removing Dust from inside the Viewfinder
-- CCD-TR44/TR54/TR64/TR84 only
(1) Re,move the screw with a screwdriw.,r (not supplied). I]3en, while sliding the RELEASE knob, turn
the eyecup in the direction of the arrow anc_ pul! it out.
(2) Clean the surface with a commercially available blower
1 2
\
To Reattach the Eyecup
(1) Align the groove on th eyecup witb the • mark on the barrel.
(2) Turn the eyecup in the direction of the arrow. Then, replace the screw.
1
2
Caution
Do not remove any other screws. You may remove only- the screw to remove the eyecup.
4O