Operating Instructions

After recording

(1) Set the POWER switch to OFF (CHG).

(2) Close the LCD panel.

(3) Eject the cassette.

(4) Attach the lens cap.

After using your camcorder (CCD-TRV107/TRV308/TRV408/TRV608, DCR-TRV140 only)

Remove the battery pack from your camcorder to avoid turning on the built-in light

accidentally.

Using the zoom feature

Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.

Using the zoom function sparingly results in better-looking recordings.

“T” side: for telephoto (subject appears closer)

“W” side: for wide-angle (subject appears farther away)

To use zoom grater than 20×

Zoom greater than 20× is performed digitally. To activate digital zoom, select the digital

zoom power in D ZOOM in the menu settings. The digital zoom function is set to OFF

as a default setting (p. 106).

The picture quality deteriorates as the picture is processed digitally.

Recording a picture

The right side of the bar shows the digital

zooming zone.

The digital zooming zone appears when you

select the digital zoom power in D ZOOM in

the menu settings.