Operating Instructions

40
Notes
During the tape photo recording, you cannot change the mode or setting.
PHOTO button does not work:
while the digital effect function is set or in use.
while the fader function is in use.
When recording a still image, do not shake your camcorder. Mosaic noise may appear
on the image.
To use the tape photo recording function using the Remote Commander
Press PHOTO on the Remote Commander. Your camcorder records an image on the
screen immediately.
When you use the tape photo recording function during normal CAMERA
recording
You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO
deeper. The still image is then recorded for about 7 seconds, and your camcorder
returns to the standby mode. During the 7 seconds to record, you cannot shoot another
still image.
DCR-TRV140 only
You can record a still image like a photograph. This mode is useful when you want to
record an image such as a photograph.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a tape which can record for 60 minutes in the SP mode.
(1) In the standby mode, keep pressing PHOTO lightly until a still image appears.
The CAPTURE indicator appears. Recording does not start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
(2) Press PHOTO deeper.
The still image on the screen is recorded for about seven seconds. The sound
during those seven seconds is also recorded.
The still image is displayed on the screen until recording is completed.
Advanced Recording Operations
Recording a still image on a tape Tape Photo
recording
PHOTO
PHOTO
1
•••••••
CAPTURE
2
PHOTO