Operating Instructions

Editing

– DCR-TRV140 only

You can record a tape from a VCR that has DV outputs. Use your camcorder as a

recorder.

Simply connect the i.LINK cable (DV connecting cable) (optional) to

DV IN/OUT and to DV OUT of the DV products. With digital-to-digital connection,

video and audio signals are transmitted in digital form for high-quality editing.

You cannot take a picture in when you connect your camcorder with other than the

i.LINK cable (DV connecting cable).

Before operation

Set DISPLAY to LCD in the menu settings (the default setting is LCD). Only SP mode is

available.

(1) Insert a blank tape (or a tape you want to record over) into your camcorder,

and insert the recorded tape into the VCR.

(2) Set the POWER switch to VCR on your camcorder.

(3) Press z REC and the button on its right simultaneously on your camcorder,

then immediately press X on your camcorder.

(4) Press N on the VCR to start playback.

The picture from a TV or VCR appears on the screen.

(5) Press X on your camcorder at the scene where you want to start recording from.

S VIDEO LANC

3,4,5

STOP

REW

PLAY FF

PAUSE

REC

DV OUT

DV IN/OUT

: Signal flow

i.LINK cable

(DV connecting cable) (optional)

Recording from video

When you have finished dubbing a tape

Press x on both your camcorder and the VCR.