TRV608

– CCD-TRV107/TRV308/TRV408/TRV608 only

You can use the built-in light to suit your shooting situation. The recommended

distance between the subject and camcorder is about 1.5 m (5 feet).

Press LIGHT repeatedly, until the indicator appears on the screen while your

camcorder is in CAMERA mode. The built-in light turns on.

If you turn the POWER switch to OFF (CHG), the built-in light turns off

simultaneously. You cannot turn the built-in light on by turning the POWER switch to

CAMERA again. To turn on the built-in light again, press LIGHT again in CAMERA

mode.

To turn off the built-in light

Press LIGHT repeatedly, until no indicator appears on the screen.

To turn on the built-in light automatically

Press LIGHT repeatedly, until the indicator appears on the screen.

The built-in light automatically turns on and off according to the ambient brightness.

CAUTION

Be careful not to touch the lighting section, because the plastic window and

surrounding surfaces are hot while the light is on. It remains hot for a while after

the light is turned off.

DANGER

Not to be handled by children.

Emits intense heat and light.

Use with caution to reduce the risk of fire or injury to persons.

Do not directly aim the light at persons or materials from less than 1.22 m (4 feet)

during use and until cool.

Turn the built-in light off when not in use.

When you press LIGHT

The indicator changes as follows:

Using the built-in light

no indicator

LIGHT

Built-in light