TRV608

Editing

Using the A/V connecting cable

Connect your camcorder to the VCR using the A/V connecting cable supplied with

your camcorder.

You can record and edit a picture with the connected VCR by using your camcorder as

a player.

Set DISPLAY to LCD in in the menu settings (The default setting is set to LCD.)

If you do not make the indicators disappear, they are recorded on tapes.

Make the indicators disappear by pressing the following buttons:

–DISPLAY on your camcorder

–DISPLAY on the Remote Commander (CCD-TRV107/TRV408 only)

(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert

the recorded tape into your camcorder.

(2) Set the input selector on the VCR to LINE. Refer to the operating instructions

of your VCR for more information.

(3) Set the POWER switch to PLAYER.

(4) Play back the recorded tape on your camcorder.

(5) Start recording on the VCR.

Refer to the operating instructions of your VCR for more information.

S VIDEO OUT

V OUT

S VIDEO

VIDEO

AUDIO

: Signal flow

Yellow

Black

— Editing —

Dubbing a tape

A/V connecting cable

(supplied)