TRV608

Editing

(4) Confirming the VCR operation

1 Insert a recordable tape into the VCR, then set to recording pause.

2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.

3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.

If the VCR starts recording, the setting is correct.

When finished, the indicator changes to COMPLETE.

(3) Setting your camcorder and the VCR to face each other

Locate the Infrared rays emitter of your camcorder and face it towards the remote

sensor of the VCR.

Set the devices about 30 cm (12 in.) apart, and remove any obstacles between the

devices.

When the VCR does not operate correctly

•After checking the code in “About the IR SETUP code,” set IR SETUP or

PAUSE MODE again.

•Place your camcorder at least 30 cm (12 in.) away from the VCR.

•Refer to the operating instructions of your VCR.

Dubbing a tape easily – Easy Dubbing

EASY DUBBING

SETUP

I R SETUP

PAUSE MODE

I R TEST

RETURN

READY

00:00:0

EASY DUBBING

SETUP

I R SETUP

PAUSE MODE

I R TEST

RETURN

ENGAGE

REC PAUSE

RETURN

EXECUTE

00:00:0

NORMAL

[

EASY DUB

END

[

EASY DUB

END

Remote sensor

Infrared rays emitter

A/V connecting cable (supplied)