Operating Instructions Video Camera Recorder CCD-TRV107/TRV108/TRV308/ TRV408/TRV608

72
In more than 5 minutes after removing the power source
The “COMMANDER”* item is returned to the default setting.
The other menu items are held in memory even when the battery is removed.
Recording a close-up picture
When REC LAMP is set to ON, the red recording lamp on the front of the camcorder
may reflect on the subject if it is close. In this case, we recommend you set REC LAMP
to OFF.
* CCD-TRV107/TRV408 only
Changing the menu settings
Icon/item
WORLD TIME
BEEP
COMMANDER*
DISPLAY
REC LAMP
POWER
switch
CAMERA
PLAYER
CAMERA
PLAYER
CAMERA
PLAYER
CAMERA
CAMERA
Mode
——
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
Meaning
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set the time
difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the
originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel the melody and beep sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
unintentional operations caused by other
VCR’s remote controls.
To show the display on the LCD screen and in
the viewfinder
To show the display on the TV screen, LCD
screen, and in the viewfinder
To light up the recording lamp at the front of
your camcorder when recording
To turn the recording lamp off so that the
subject is not aware of the recording