TRV608

Remote Commander

— CCD-TRV107/TRV408 only

The buttons that share the same name on the Remote Commander and your camcorder

function identically to the buttons on your camcorder.

Identifying the parts and controls

To prepare the Remote Commander

Insert 2 size AA (R6) batteries by matching the + and – polarities on the batteries to

the + – marks inside the battery compartment.

1 Transmitter

Point toward the remote sensor to

control the camcorder after turning on

the camcorder.

2 Tape transport buttons (p. 31)

Notes on the Remote Commander

•Point the remote sensor away from strong light sources such as direct sunlight or

overhead lighting. Otherwise, the Remote Commander may not function properly.

•Your camcorder works in the commander mode VTR 2. The commander modes

1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid

remote control unintentional operations. If you use another Sony VCR in the

commander mode VTR 2, we recommend changing the commander mode or covering

the sensor of the VCR with black paper.

3 DISPLAY button (p. 30)

4 START/STOP button (p. 19)

5 Power zoom button (p. 22)