Manual

Checking the recording
- END SEARCH / EDITSEARCH / Rec Review
You can use these buttons to check the recorded picture or shoot so that the transltLon
between the last recorded scene and the next scene you record Lssmooth
+ EDITSEARCH - _)
8
I
w
END SEARCH
You call go to the end of the recorded sectLon after you record.
Press END SEARCH m the standby mode
The last 5 seconds of the recorded section are played back and playback stops You can
momtor the sound from the speaker, headphones (CCDoTRV87 only) or an earphone
(CCD-TRV17/TRV37/TRV57/TRV67 only).
Note
If you start recording after using the end search function, occasLonally, the transitLon
between the last scene you recorded and the next scene may not be smooth•
Once you eject the cassette after you have recorded on the tape
The end search function does not work.
EDITSEARCH
You call search for tile next recording start point
Hold down the +/- (@) side of EDITSEARCH in the standby mode. The recorded
sectLon is played back
+ ' to go forward
- : to go backward
Release EDITSEARCH to stop playback If you press START/STOP, re-recording begins
from the point you released EDITSEARCH. You cannot monitor the sound•
Rec Review
You can check the last recorded sectLon.
Press the - (@) sLde of EDITSEARCH momentarily m the standby mode.
The last few seconds of the recorded secbon are played back. You can monitor the
sound from the speaker, headphones (CCD-TRV87 only) or an earphone (CCD-TRV17/
TRV37/TRV57/TRV67 only).
23