Manual

Editing w
Dubbing a tape
Using the A/V connecting cable or S video connecting cable
(not supplied)
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the input selector on the VCR to LINE.
Refer to the operating instructions of your VCR for more information.
(3) Set the POWER switch to VTR (CCD-TRV87) or PLAYER (CCD-TRV17/
TRV37/TRV57/TRV67).
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR for more information.
CCD-TRV17/TRV37/TRV57/TRV67
VIDEO*
VIDEO OUT
AUDIO OUT
,-II,,
IN
• VIDEO
O AUDIO
VCR
: Signal flow
* CCD-TRV67 only
CCD-TRV87
AUDIO
: Signal flow
When you have finished dubbing a tape
Press lion both your camcorder and the VCR.
VCR
To prevent deterioration of pictures from dubbing
52 Set EDIT to ON in the menu settings before dubbing.