Manual

Connections
Caution
This unit is designed for negative ground 12 V
DC operation only.
Before making connections, disconnect the earth
terminal of the car battery to avoid short circuits.
Connect the yellow and red power input leads
only after all other leads have been connected.
Be sure to connect the red power input lead to the
positive 12 V power terminal which is powered
when the ignition switch is in the accessory
position.
Run all earth wires to a common earth point.
When finished making all the connections,
press the reset button of the CD chnager. (See
"Reset button" below.)
The use of optical instruments with this product
will increase eye hazard.
Reset button
After the installation and connections are completed, after the batteries have been changed, be sure to
press the reset button with a ball*point pen, etc.
Connectiondiagram
from the car antenna*
4
Speaker system
Caraudio
* An adaptor {optional) may be necessary Foryour
car and car audio system. In such a case, consult
your dealer.
Antenna connector*
0.5 m
0,5 m
Relay box
_lm
Fuse
5,5 m Fuse
,(
_5.5 m
5,5 m