User Guide

7
Actual total number: Sony CDX-C810DSP (E) 3-856-118-41 (2)
EN
3 Press (4) (n) repeatedly until the
desired program appears.
Program 1 playback
µ
Program 2 playback
µ
Programs 1 and 2 playback
µ
Normal playback
Program Play starts.
To go back to the normal playback mode,
select “PGM OFF” in step 3 above.
Note
“NO Data” appears in the display if no track is stored in
the program.
Erasing the entire program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
2 Press (1) (N) repeatedly until “DEL”
appears.
To delete Program 2, press (4) (n)
repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
The entire program is erased.
4 When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
Adding tracks to the program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3 Press either side of (SEEK/AMS) to select
the track you want to insert.
4 Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
continue to next page n
CD Player
SUR EQ
PLAY MODE
PGM
PGM 1
CD
1
SUR EQ
PLAY MODE
PGM
PGM 2
CD
2
SUR EQ
PLAY MODE
PGM
PGM 1+2
CD
1
+
2
SUR EQ
PLAY MODE ENTER
TRACK
7 P1.‚8
CD
SUR EQ
PLAY MODE ENTER
--PGM1--
DEL
SUR EQ
PLAY MODE ENTER
NO Data
P1
SUR EQ
PLAY MODE ENTER
TRACK
4 P1.‚3
CD
SUR EQ
PLAY MODE ENTER
TRACK
2 P1.‚2
CD
Track slot number
SUR EQ
PLAY MODE
PGM OFF
CD