filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB01COV-CEL.fm] masterpage:Right 2-067-346-11(1) Micro Hi-Fi Component System Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. ______________ Serial No.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB02REG-CEL.fm] masterpage:Left WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB03REG-CELTOC.fm] masterpage:Right Table of Contents How to use this manual........................... 4 Playable discs.......................................... 4 Getting Started Hooking up the system............................ 6 Setting the clock...................................... 8 CD/MP3 – Play Loading a disc ......................................... 8 Playing a disc ..........................
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB04PRE-CEL.fm] How to use this manual This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the system having the same or similar names. Playable discs You can play back the following discs on this system. Other discs cannot be played back.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB04PRE-CEL.fm] Notes on CD-R and CD-RW • Some CD-Rs or CD-RWs cannot be played on this system depending upon the recording quality or physical condition of the disc, or the characteristics of the recording device. Furthermore, the disc will not play if it has not been correctly finalized. For more information, see the operating instructions for the recording device.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB05CON-CEL.fm] masterpage:Left Getting Started Hooking up the system Perform the following procedures 1 to 4 to hook up your system using the supplied cords and accessories. Left speaker Right speaker 1 2 3 4 AM loop antenna FM lead antenna 1 Connect the speakers. 2 Connect the FM and AM antennas. Connect the right and left speaker cords to the SPEAKER terminals as shown below.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB05CON-CEL.fm] 4 Connect the power cord to a wall outlet. Plug type B ANT If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). To turn on the system, press ?/1.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB06CDP-CEL.fm] Setting the clock Use buttons on the remote for the operation. 1 2 3 4 5 6 masterpage:Left CD/MP3 – Play Loading a disc Press ?/1 to turn on the system. Press CLOCK/TIMER SET. 1 Press ./> repeatedly to set the hour. 2 Press CD (or FUNCTION repeatedly on the unit) to switch the function to CD. Insert a disc in the disc slot with the label side up. Press ENTER. Press .
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB06CDP-CEL.fm] Other operations Playing a disc To — Normal Play/Shuffle Play 1 2 3 Playing time Do this Stop play Press x (CD stop). Pause Press X (or CD/NX on the unit). Press again to resume play. Select a track Press ./> (or .m/ M> on the unit except for CMT-GPX5) repeatedly. Select an album of MP3 Press ALBUM +/– repeatedly after step 2.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB06CDP-CEL.fm] masterpage:Left Tip When disc access takes a long time, set “CD POWER” and “ON” by CD power manage function (page 13). Playing repeatedly — Repeat Play You can play all the tracks or a single track on a disc repeatedly. MP3 audio tracks cannot be played on CMTGPX5. Press REPEAT repeatedly during playback until “REP” or “REP 1” appears.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB06CDP-CEL.fm] Creating your own program masterpage:Right Other operations Do this Press PLAY MODE in stop mode repeatedly until both “PGM” and “SHUF” disappears. Erase the program Press CLEAR in step 4. Each time you press the button, a track is cleared from the end of the program. — Program Play You can make a program of up to 25 steps.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB07TUN-CEL.fm] masterpage:Left Tip Press TUNING MODE to stop scanning. Tuner Presetting radio stations You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. Manual tuning preset You can manually tune in and store the radio frequency of the desired stations.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB07TUN-CEL.fm] To change the AM tuning interval (Except for European model) To improve tuner reception When tuner reception is poor, set CD player power off by the CD power manage function. CD power is factory set to on. 1 Press FUNCTION repeatedly to switch the function to CD. 2 Press ?/1 to turn off the system.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB07TUN-CEL.fm] masterpage:Left Tips • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. • When an FM stereo program has static noise, press FM MODE until “MONO” appears. There will be no stereo effect, but the reception will improve.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB08TAP-CEL.fm] Playing a tape Tape – Play Loading a tape 1 2 masterpage:Right You can use TYPE I (normal). 1 Press A PUSH EJECT on the unit. Load a tape into the cassette holder. 2 Press DIRECTION on the unit repeatedly to select “g” to play one side of a tape, “h” to play both sides, or “j”* to play both sides repeatedly.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB08TAP-CEL.fm] Tape – Recording Recording your favorite CD tracks on a tape — CD-TAPE Synchro Recording You can record a whole CD on a tape. You can use TYPE I (normal). Use buttons on the unit for the operation. 1 2 masterpage:Left To record a disc by specifying track order You can record only your favorite CD tracks using Program Play.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB08TAP-CEL.fm] masterpage:Right Note Recording on a tape manually When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. — Manual Recording You can record just the portions you like from a CD on a tape. You can also record a radio program. Use buttons on the unit for the operation.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB09TIM-CEL.fm] masterpage:Left Sound Adjustment Timer Adjusting the sound Falling asleep to music You can adjust the bass and treble to enjoy more powerful sound. Generating a more dynamic sound (Dynamic Sound Generator X-tra) Press DSGX on the unit. To cancel the DSGX, press DSGX on the unit again.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB09TIM-CEL.fm] Waking up to music — Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 8). Use buttons on the remote for the operation. 1 Prepare the sound source you want to play. 2 3 4 Adjust the volume. Press CLOCK/TIMER SET. Press ./> repeatedly until “PLAY SET” appears, then press ENTER.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB09TIM-CEL.fm] Timer recording radio programs masterpage:Left Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly — Rec Timer To timer record, you must first preset the radio station (see “Presetting radio stations” on page 12) and set the clock (see “Setting the clock” on page 8). Use buttons on the remote for the operation.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB09TIM-CEL.fm] Display Turning off the display masterpage:Right Viewing information about the disc in the display — Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB10OPT-CEL.fm] masterpage:Left Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. Optional analog component From the audio output jacks of an optional analog component A MD/VIDEO jacks Use audio cords (not supplied) to connect an optional analog component (MD deck, etc.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB11TRB-CEL.fm] Troubleshooting Problems and remedies Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB11TRB-CEL.fm] Play does not start. • Eject the disc and check whether a disc is loaded. • Wipe the disc clean (page 27). • Replace the disc. • Load the disc that this system can play (page 4). • Load the disc correctly. • Load the disc with the label side up. • Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB11TRB-CEL.fm] Optional components There is no sound. • Refer to General item “There is no sound.” (page 23) and check the condition of the system. • Connect the component properly (page 22) while checking: – if the cords are connected properly. – if the cord plugs are firmly inserted all the way. • Turn on the connected component.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB11TRB-CEL.fm] masterpage:Left Other INVALID You pressed an invalid button.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.fm] masterpage:Right On operation Additional Information Precautions On operating voltage • Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. • The voltage selector is located at the bottom of the apparatus.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.fm] masterpage:Left To save a tape permanently To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated. Break off the cassette tab If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. Before placing a cassette in the tape deck Take up any slack in the tape.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.fm] Continuous RMS power output (reference): 35 + 35 W (6 ohms at 1 kHz, 10% THD) Music power output (reference): 60 + 60 W Inputs MD/VIDEO: Outputs PHONES: SPEAKER: Sensitivity 450/250 mV, impedance 47 kilohms Accepts headphones with an impedance of 8 ohms or more Accepts impedance of 6 to 16 ohms.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.fm] masterpage:Left General Power requirements North American model: European model: Korean model: Australian model: Taiwanese model: Other models: 120 V AC, 60 Hz 230 V AC, 50/60 Hz 220 V AC, 60 Hz 230 – 240 V AC, 50/60 Hz 110 – 120 V AC, 50/60 Hz 110 – 120 V or 220 – 240 V AC, 50/60 Hz Adjustable with voltage selector Power consumption CMT-GPX7: 105 W 0.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.fm] masterpage:Right-3 (3 column) List of button locations and reference pages How to use this page Illustration number r Use this page to find the location of buttons and other parts of the system that are mentioned in the text.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB12INF-CEL.