User Guide

35
Handling Discs
Handle discs only by the edges. Do
not touch the recording surface of the
disc.
Except where specified by the disc
manufacturer or warranty, do not
write on or attach labels to discs.
Do not store discs in a dusty or dirty
location, in direct sunlight, near a
heater or in a humid location.
Do not spill liquids on a disc.
To protect valuable data, always store
discs in their cases.
Gently wipe discs with a soft cloth,
from the center straight towards the
outer edge.
If a disc is very dirty, wet the cloth
with water, wring it out thoroughly,
wipe the disc with the damp cloth and
then use a dry cloth to wipe any
moisture off of the disc.
Do not use benzene, record cleaner,
anti-static solutions or other liquids,
as they can damage the disc.
Never wipe a CD-R or CD-RW disc
with a cleaning solution before
recording data on the disc. Use a
blower to blow any dust off of the
surface of the disc.
Scratches or dust on the unrecorded
portion of a CD-R or CD-RW disc
may prevent proper data recording.
Handle discs carefully.
Battery Pack
Considerations
The correct battery pack for the
CRX10U is the Sony NP-F550. One
pack is supplied with the drive, but
additional packs can be purchased
separately.
The CRX10U does not support the
power management feature of the NP-
F550 InfoLithium battery pack.
Charge the battery pack using the
CRX10U with the provided AC
adapter (AC-CRX10U).
The battery pack is partially charged
before shipping, but you should
charge it completely before use.
The battery pack gradually discharges
itself when not being used, so even
after it has been fully charged, we
recommend recharging before use (if
more than a day or two has passed).
Charge the battery pack where the
surrounding temperature is in the
range from 10 to 30°C. This will
provide longer battery operation.
If the battery is not used for a long
time, it should be charged and then
discharged completely before storage,
and once each year to maintain its
usability.