4-198-109-11(1) FM/AM Compact Disc Player Operating Instructions US Manual de instrucciones ES Owner’s Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Serial No. To cancel the demonstration (DEMO) display, see page 6. Para cancelar la pantalla de demostración (DEMO), consulte la página 6.
Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/ connections manual. Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warning if your car’s ignition has no ACC position Be sure to set the Auto Off function (page 20). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off.
Table of Contents Getting Started Searching for a track Playable discs on this unit . . . . . . . . . . . . . . . . . 6 Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . 6 Canceling the DEMO mode . . . . . . . . . . . . . . . 6 Preparing the card remote commander . . . . . . . 6 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 6 Detaching the front panel . . . . . . . . . . . . . . . . . 7 Attaching the front panel . . . . . . . . . . . . . . .
Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.sony.
Getting Started Playable discs on this unit This unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 21)). Type of discs Preparing the card remote commander Remove the insulation film. Label on the disc CD-DA Tip For how to replace the battery, see page 22. MP3 WMA AAC Setting the clock The clock uses a 12-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Rotate the control dial until “CLOCKADJ” appears, then press it.
Detaching the front panel You can detach the front panel of this unit to prevent theft. Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press and hold (SOURCE/OFF). The unit is turned off.
Location of controls and basic operations Main unit This section contains instructions on the location of controls and basic operations. For details, see the respective pages. E Disc slot Insert the disc (label side up), playback starts. A SEEK +/– buttons Radio: To tune in stations automatically (press); find a station manually (press and hold). CD/USB: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold).
N RESET button (located behind the front panel) page 6 O Number buttons Radio: To receive stored stations (press); store stations (press and hold). CD/USB: (1)/(2): ALBUM –/+ (during MP3/WMA/ AAC playback) To skip albums (press); skip albums continuously (press and hold). (3): REP*3 page 12, 14, 15 (4): SHUF page 12, 14, 15 (6): PAUSE To pause playback. To cancel, press again. P DSPL (display)/SCRL (scroll) button page 11, 12, 13, 15 To change display items (press); scroll the display item (press and hold).
RM-X151 Card Remote Commander 1 2 3 OFF SOURCE ATT SEL MODE Remove the insulation film before use (page 6). 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 + VOL – A OFF button To turn off the power; stop the source. B SOURCE button*1 To turn on the power; change the source (Radio/CD/USB/AUX). C < (.)/, (>) buttons To control Radio/CD/USB, the same as (SEEK) –/+ on the unit. Setup, sound setting, etc., can be operated by < ,. q; D DSPL (display) button To change display items.
Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items Storing automatically — BTM 1 Press (SOURCE/OFF) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press and hold the select button.
Type of programs NEWS (News), INFORM (Information), SPORTS (Sports), TALK (Talk), ROCK (Rock), CLS ROCK (Classic Rock), ADLT HIT (Adult Hits), SOFT RCK (Soft Rock), TOP 40 (Top 40), COUNTRY (Country), OLDIES (Oldies), SOFT (Soft), NOSTALGA (Nostalgia), JAZZ (Jazz), CLASSICL (Classical), R AND B (Rhythm and Blues), SOFT R B (Soft Rhythm and Blues), LANGUAGE (Foreign Language), REL MUSC (Religious Music), REL TALK (Religious Talk), PERSNLTY (Personality), PUBLIC (Public), COLLEGE (College), WEATHER (Weather)
USB devices For details on the compatibility of your USB device, visit the support site. • This unit cannot recognize USB devices via a USB hub. Display items Support site http://esupport.sony.com http://www.sony.com/mobileAV • MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant with the USB standard can be used. • Corresponding codec is MP3 (.mp3), WMA (.wma), AAC (.m4a) and AAC (.mp4). • Backup of data in a USB device is recommended.
iPod Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. Select To play TRACK track repeatedly. ALBUM album repeatedly. For details on the compatibility of your iPod, see “About iPod” (page 22) or visit the support site. In these Operating Instructions, “iPod” is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations. SHUF ALBUM album in random order.
2 Adjust the volume. Press and hold (SOURCE/OFF) for 1 second to stop playback. Removing the iPod 1 Stop the iPod playback. 2 Remove the iPod. Caution for iPhone When you connect an iPhone via USB, telephone volume is controlled by iPhone itself. In order to avoid sudden loud sound after a call, do not increase the volume on the unit during a telephone call. Skip continuously Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears.
Searching for a track Searching a track by name — Quick-BrowZer™ To cancel Jump mode Press You can search for a track in a CD or USB device easily by category. Searching by alphabetical order — Alphabet search 1 Press (BROWSE). The unit enters the Quick-BrowZer mode, and the list of search categories appears. When an iPod is connected to the unit, you can search for a desired item alphabetically. 2 Rotate the control dial to select the desired search category, then press it to confirm.
Searching a track by listening to track passages — ZAPPIN™ While playing back short track passages in a CD or USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. 1 Press (ZAP) during playback. After “ZAPPIN” appears in the display, playback starts from a passage of the next track. The passage is played for the set time, then a click sounds and the next passage starts.
Enjoying sophisticated sound functions — Advanced Sound Engine 5 1 Rotate the control dial to select the frequency range, then press it. Advanced Sound Engine, Sony’s new sound engine, creates an ideal in-car sound field with digital signal processing. Advanced Sound Engine contains the following features: EQ7, Listening Position, DM+ Advanced, Rear Bass Enhancer. BAND1: 63 Hz BAND2: 160 Hz BAND3: 400 Hz BAND4: 1 kHz BAND5: 2.5 kHz BAND6: 6.3 kHz BAND7: 16.
The options for “SET SW POS” are indicated below. “NEAR” (A): Near “NORMAL” (B): Normal “FAR” (C): Far DM+ Advanced DM+ Advanced improves digitally compressed sound by restoring high frequencies lost in the compression process. 1 During reception/playback, press the select button. 1 During playback, press the select button. 2 Rotate the control dial until “SET POSITION” appears, then press it. 2 Rotate the control dial until “DM+” appears, then press it.
Adjusting setup items — SET 1 Press and hold the select button. The setup display appears. 2 Rotate the control dial until the desired item appears, then press it. 3 Rotate the control dial to select the setting, then press it.* The setting is complete. 4 Press (BACK). The display returns to normal reception/play mode. * For CLOCK-ADJ and BTM settings, step 4 is not necessary. Note Displayed items will differ, depending on the source and setting.
Other functions Additional Information Using optional equipment Precautions Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below: • Cool off the unit beforehand if your car has been parked in direct sunlight.
– CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet/Romeo or multi-session. Playback order of MP3/WMA/AAC files MP3/WMA/AAC Folder (album) MP3/WMA/ AAC file (track) Maintenance Replacing the lithium battery of the card remote commander Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.
Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 7) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. Main unit Removing the unit 1 Remove the protection collar. 1 Detach the front panel (page 7). 2 Pinch both edges of the protection collar, then pull it out.
Specifications AUDIO POWER SPECIFICATIONS CEA2006 Standard Power Output: 17 Watts RMS 4 at 4 Ohms < 1% THD+N SN Ratio: 80 dBA (reference: 1 Watt into 4 Ohms) Tuner section FM Tuning range: 87.5 – 107.
Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. If the problem is not solved, visit the following support site. Support site http://esupport.sony.com http://www.sony.com/mobileAV General No power is being supplied to the unit. • Check the connection or fuse. • If the unit is turned off and the display disappears, it cannot be operated with the remote commander.
MP3/WMA/AAC files cannot be played back. The disc is incompatible with the MP3/WMA/AAC format and version. For details on playable discs and formats, visit the support site. MP3/WMA/AAC files take longer to play back than others. The following discs take a longer time to start playback. – a disc recorded with a complicated tree structure. – a disc recorded in Multi Session. – a disc to which data can be added. The display items do not scroll. • For discs with very many characters, those may not scroll.
READ The unit is reading all track and album information on the disc. t Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. RESET This unit or USB device cannot be operated due to a problem. t Press the RESET button (page 6). USB NO SUPRT (USB Not Support) The connected USB device is not supported. t For details on the compatibility of your USB device, visit the support site.
Asegúrese de instalar esta unidad en el tablero del automóvil por razones de seguridad. Para realizar la instalación y las conexiones, consulte el manual de instalación y de conexiones suministrado. HD RadioTM es una marca propietaria de iBiquity Digital Corp. El logotipo “SAT Radio Ready” indica que este producto controla un módulo de sintonizador de radio por satélite (se vende por separado).
3
Tabla de contenido Procedimientos iniciales Búsqueda de una pista Discos que se pueden reproducir en esta unidad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Restauración de la unidad . . . . . . . . . . . . . . . . . 6 Cancelación del modo DEMO. . . . . . . . . . . . . . 6 Preparación del control remoto de tarjeta . . . . . 6 Ajuste del reloj . . . . . . . . . . . . . . . . . . . . . . . . . 6 Extracción del panel frontal. . . . . . . . . . . . . . . .
Sitio Web de soporte técnico en línea Para resolver cualquier duda u obtener la información más reciente sobre el soporte técnico de este producto, visite el siguiente sitio Web: http://esupport.sony.com http://www.sony.
Procedimientos iniciales Discos que se pueden reproducir en esta unidad Preparación del control remoto de tarjeta Retire la lámina de aislamiento. Esta unidad permite reproducir discos CD-DA (incluidos CD TEXT) y CD-R/CD-RW (archivos MP3/WMA/AAC (página 22)). Tipos de discos Etiqueta del disco CD-DA Sugerencia Si desea obtener información adicional sobre cómo sustituir la pila, consulte la página 23.
Extracción del panel frontal Es posible extraer el panel frontal de la unidad para evitar que la roben. Colocación del panel frontal Fije la parte A del panel frontal en la parte B de la unidad, tal como muestra la ilustración, y presione el lado izquierdo hasta que encaje. Alarma de precaución Si gira el interruptor de la llave de encendido hasta la posición OFF sin haber extraído el panel frontal, la alarma de precaución sonará durante unos segundos.
Ubicación de los controles y operaciones básicas Unidad principal Este apartado contiene instrucciones acerca de la ubicación de los controles y las operaciones básicas. Consulte las páginas indicadas para obtener información detallada. E Ranura del disco Inserte el disco (con la etiqueta mirando hacia arriba) y se iniciará la reproducción. A Botones SEEK +/– Radio: Para sintonizar emisoras en forma automática (presionar); para localizar una emisora en forma manual (mantener presionado).
N Botón RESET (ubicado detrás del panel frontal) página 6 O Botones numéricos Radio: Para recibir las emisoras almacenadas (presionar); para almacenar emisoras (mantener presionado). CD/USB: (1)/(2): ALBUM –/+ (durante la reproducción de archivos MP3/WMA/AAC) Para saltar álbumes (presionar); saltar álbumes continuamente (mantener presionado). (3): REP*3 página 12, 14, 15 (4): SHUF página 12, 14, 15 (6): PAUSE Para pausar la reproducción. Para cancelar esta función, vuelva a presionarlo.
Control remoto de tarjeta RM-X151 1 2 3 OFF SOURCE ATT SEL MODE Retire la película de aislamiento antes de usar la unidad (página 6). 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 + VOL – q; qa A Botón OFF Para apagar la alimentación; para detener la fuente. B Botón SOURCE*1 Para encender la alimentación; para cambiar la fuente (Radio/CD/USB/AUX). C Botones < (.)/, (>) Para controlar el CD/Radio/USB, de la misma manera que con (SEEK) –/+ en la unidad.
Radio Almacenamiento y recepción de emisoras Precaución Para sintonizar emisoras mientras maneja, utilice la función BTM (Memoria de la mejor sintonía) para evitar accidentes. Almacenamiento automático — BTM 1 2 3 Presione (SOURCE/OFF) varias veces hasta que aparezca “TUNER”. Para cambiar de banda, presione (MODE) varias veces. Puede seleccionar entre FM1, FM2, FM3, AM1 y AM2. Mantenga presionado el botón de selección. Aparecerá la pantalla de ajustes.
Selección de PTY 1 Presione (PTY) durante la recepción FM. Si la estación está transmitiendo datos PTY aparece el nombre del tipo de programa actual. 2 Gire el selector de control hasta que aparezca el tipo de programa deseado y, a continuación, presiónelo. La unidad comienza a buscar una estación que emita el tipo de programa seleccionado.
Dispositivos USB Para obtener más información acerca de la compatibilidad del dispositivo USB, visite el sitio web de soporte técnico. Sitio Web de soporte técnico en línea http://esupport.sony.com http://www.sony.com/mobileAV • Es posible utilizar dispositivos USB de almacenamiento masivo (MSC) y de protocolo de transferencia multimedia (MTP) que cumplan con el estándar USB. • Los códecs correspondientes son MP3 (.mp3), WMA (.wma), AAC (.m4a) y AAC (.mp4).
Reproducción repetida y aleatoria 1 Durante la reproducción, presione (3) (REP) o (4) (SHUF) varias veces hasta que aparezca el ajuste deseado. Seleccione Para reproducir TRACK pistas en forma repetida. ALBUM álbumes en forma repetida. SHUF ALBUM álbumes en orden aleatorio. SHUF DEVICE dispositivos en orden aleatorio. iPod Para obtener más información acerca de la compatibilidad de su iPod, consulte “Acerca de iPod” (página 23) o visite el sitio Web de soporte técnico en línea.
* En caso de que se conecte un iPod touch o un iPhone, o si la última vez se realizó la reproducción en el iPod en el modo de control de pasajero, el logotipo no aparecerá en la pantalla. 2 Ajuste el volumen. Mantenga presionado (SOURCE/OFF) 1 segundo para detener la reproducción. Omitir álbumes, podcasts, géneros, listas de reproducción y artistas Para Realice esta acción Omitir Presione (1)/(2) (ALBUM –/+) [presionar una vez para cada opción] Extracción del iPod 1 Detenga la reproducción del iPod.
Utilización directa del iPod — Control de pasajero Puede utilizar directamente un iPod conectado al conector de base. 1 Durante la reproducción, mantenga presionado (MODE). Aparece “MODE IPOD” y se puede utilizar el iPod directamente. Para cambiar el elemento en pantalla Presione (DSPL). Los elementos en pantalla cambian de la manera siguiente: Nombre de la pista t Nombre del artista t Nombre del álbum t MODE IPOD t Reloj Para salir del modo de control de pasajero Mantenga presionado (MODE).
4 Gire el selector de control para seleccionar el elemento deseado y presiónelo. Si el elemento seleccionado es una pista empieza la reproducción. Para cancelar el modo de Omisión Presione (BACK) o (SEEK) –. Nota Si no se efectúa ninguna operación durante 7 segundos, se cancelará el modo de Omisión.
Ajustes de sonido y Menú de configuración Cambio de los ajustes de sonido Ajuste de las características de sonido 1 Durante la recepción/reproducción, presione el botón de selección. 2 Gire el selector de control hasta que aparezca el elemento de menú deseado y, a continuación, presiónelo. 3 Gire el selector de control para seleccionar el ajuste y, a continuación, presiónelo. El ajuste finalizó. 4 Presione (BACK). La pantalla vuelve al modo de recepción/ reproducción normal.
Personalización de la curva de ecualizador — Ajuste de EQ7 “CUSTOM” de EQ7 le permite realizar sus propios ajustes en el ecualizador. 1 Seleccione una fuente y, a continuación, presione el botón de selección. 2 Gire el selector de control hasta que aparezca “EQ7 SETTING” y, a continuación, presiónelo. 3 Gire el selector de control hasta que aparezca “BASE” y, a continuación, presiónelo. Puede seleccionar una curva de ecualizador como base para una personalización posterior.
Gire el selector de control para seleccionar entre “NEAR”, “NORMAL” o “FAR” y, a continuación, presiónelo. 5 Presione (BACK). La pantalla vuelve al modo de recepción/ reproducción normal. Para cancelar la posición de escucha, seleccione “OFF” en el paso 3. Ajuste de la posición de escucha Es posible sintonizar con mayor precisión el ajuste de la posición de escucha.
Definición de los elementos de configuración — SET 1 Mantenga presionado el botón de selección. Aparecerá la pantalla de ajustes. 2 Gire el selector de control hasta que aparezca el elemento deseado y, a continuación, presiónelo. 3 Gire el selector de control para seleccionar el ajuste y, a continuación, presiónelo.* El ajuste finalizó. 4 Presione (BACK). La pantalla vuelve al modo de recepción/ reproducción normal. * Para la configuración de CLOCK-ADJ y BTM, el paso 4 no es necesario.
Otras funciones Información complementaria Uso de equipo opcional Precauciones Equipo de audio auxiliar Si conecta un dispositivo de audio portátil opcional a la toma de entrada AUX (minitoma estéreo) de la unidad y simplemente selecciona la fuente, podrá escuchar por los altavoces del automóvil. Puede ajustar cualquier diferencia en el nivel de volumen entre la unidad y el dispositivo de audio portátil.
– caracteres que se pueden visualizar en el nombre de una carpeta o un archivo: 32 (Joliet)/64 (Romeo) • Si un disco multisesión empieza con una sesión CD-DA, se reconoce como un disco CD-DA y las otras sesiones no se reproducen. • Discos que NO se pueden reproducir en esta unidad – CD-R/CD-RW de calidad de grabación deficiente. – CD-R/CD-RW grabados con un dispositivo de grabación no compatible. – CD-R/CD-RW no finalizados correctamente.
Notas sobre la pila de litio • Mantenga la pila de litio fuera del alcance de los niños. Si se ingiriese, póngase en contacto inmediatamente con un médico. • Limpie la pila con un paño seco para garantizar un contacto óptimo. • Asegúrese de observar la polaridad correcta al instalarla. • No sujete la pila con pinzas metálicas, ya que podría producirse un cortocircuito. Extracción de la unidad 1 Extraiga el marco de protección. 1 Extraiga el panel frontal (página 7).
Especificaciones Sección del sintonizador FM Es posible que su distribuidor no comercialice algunos de los accesorios que figuran en la lista anterior. Pídale información detallada. El diseño y las especificaciones están sujetos a cambios sin previo aviso.
Solución de problemas La siguiente lista de comprobación le ayudará a solucionar los problemas que puedan producirse con la unidad. Antes de consultarla, revise los procedimientos de conexión y de funcionamiento. Si no se resuelve el problema, visite el siguiente sitio web de soporte técnico. Sitio Web de soporte técnico en línea http://esupport.sony.com http://www.sony.com/mobileAV Generales 26 La unidad no recibe alimentación. • Revise la conexión o el fusible.
No se inicia la reproducción. • Disco defectuoso o sucio. • Los discos CD-R/CD-RW no son para audio (página 22). No es posible reproducir archivos MP3/WMA/ AAC. El disco no es compatible con el formato y la versión de MP3/WMA/AAC. Para obtener más información acerca de los discos y formatos que se pueden reproducir, visite el sitio Web de soporte técnico en línea. Los archivos MP3/WMA/AAC tardan más tiempo en reproducirse que los demás.
OFFSET Es posible que se haya producido una falla interna. t Revise la conexión. Si el indicador de error permanece en pantalla, póngase en contacto con el distribuidor Sony más cercano. OVERLOAD El dispositivo USB está sobrecargado. t Desconecte el dispositivo USB y, a continuación, presione (SOURCE/OFF) para cambiar la fuente. t Indica que el dispositivo USB está fuera de servicio, o que hay un dispositivo incompatible conectado.
If you have any questions/problems regarding this product, try the following: 1 Read Troubleshooting in these Operating Instructions. 2 Reset the unit. Note: Stored data may be erased. 3 Please contact (U.S.A. only); Call 1-800-222-7669 URL http://www.SONY.com http://www.sony.