Help Guide

Scan the QR Code on the monitor of the camera using the iPhone or iPad.
6
Install the profile (setting information) by following the instructions shown on the iPhone or iPad screen
and select [OK].
The profile will be installed to the iPhone or iPad.
If you have activated the passcode lock function for your iPhone or iPad, you will need to enter the passcode.
Enter the passcode that you set for your iPhone or iPad.
7
Check the SSID displayed on the monitor of the camera.
8
Select [Settings] on the “Home” screen → [Wi-Fi] → the SSID for the camera that was displayed on the
iPhone or iPad in Step 8.
The iPhone or iPad will connect to the product.
9
Set the camera to shooting mode.
10
205