User manual
Table Of Contents
- Learning more about the camera (“Help Guide”)
- Viewing the Guide
- Checking the supplied items
- Identifying parts
- Inserting the battery pack
- Charging the battery pack
- Inserting a memory card (sold separately)
- Setting the language and the clock
- Shooting still images/movies
- Viewing images
- Introduction of other functions
- Using software
- Importing images to your computer and using them (PlayMemories Home)
- Adding functions to the camera
- Number of still images and recordable time of movies
- Notes on using the camera
- Notes on High Frame Rate shooting
- Specifications
GB
15
x
Supplying power
You can use the AC Adaptor (supplied) to supply power during shooting or
playing back images, reducing battery pack consumption.
• The camera will not activate if there is no remaining battery. Insert a sufficiently
charged battery pack into the camera.
• If you use the camera while power is being supplied from a wall outlet (wall
socket), make sure that the icon ( ) displays on the monitor.
• Do not remove the battery pack while power is being supplied from a wall outlet
(wall socket). If you remove the battery pack, the camera will turn off.
• Do not remove the battery pack while the access lamp (page 9) is lit. The data on
the memory card may be damaged.
• As long as the power is on, the battery pack will not be charged even if the camera
is connected to the AC Adaptor.
• Under certain conditions, power may be supplied from the battery supplementarily
even if you are using the AC Adaptor.
• While power is being supplied via USB connection, the temperature inside the
camera will rise and the continuous recording time may be shortened.
• When using a mobile charger as a power source, confirm that it is fully charged
before use. Also, be careful of the remaining power on the mobile charger during
use.
Notes
Inserting a memory card (sold separately)
1
Open the cover.
2
Insert the memory card.
• With the notched corner facing as illustrated, insert the memory card
until it clicks into place.
3
Close the cover.
Ensure the notched corner
faces correctly.