4-579-865-11(1) Digital Still Camera Instruction Manual “Help Guide” (Web manual) Refer to “Help Guide” for in-depth instructions on the many functions of the camera. http://rd1.sony.
English Learning more about the camera (“Help Guide”) Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. WW843944 (DSC-RX1RM2) Serial No. Model No. ACSerial No. WARNING “Help Guide” is an on-line manual. You can read the “Help Guide” on your computer or smartphone. Refer to it for in-depth instructions on the many functions of the camera.
CAUTION Battery pack If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions. • Do not disassemble. • Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it. • Do not short circuit and do not allow metal objects to come into contact with the battery terminals. • Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.
For Customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: WW843944 Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part15 of the FCC Rules.
For Customers in Canada This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery. For Customers in Singapore For customers who purchased their camera from a store in Japan that caters to tourists Note Some certification marks for standards supported by the camera can be confirmed on the screen of the camera. Select MENU t (Setup) t [Certification Logo].
Table of contents Introduction of functions ................................................. 10 Before use Notes on using your camera ............................................ 12 Checking the supplied items ............................................ 16 Identifying parts .............................................................. 17 Front side .................................................................... 17 Rear side .....................................................................
Preparing the camera Charging the battery pack ................................................ 47 Charging time (Full charge) ....................................... 50 Charging by connecting to a computer ...................... 51 Checking the remaining battery charge ...................... 51 Supplying power from a wall outlet (wall socket) ..... 52 To remove the battery pack ........................................ 53 Inserting a memory card (sold separately) ......................
Using applications Adding applications to the camera (PlayMemories Camera Apps) ................................... 75 Downloading applications .......................................... 75 Launching the application .......................................... 76 Using a computer Developing RAW images (Image Data Converter) ......... 77 Installing Image Data Converter ................................ 77 Importing images to your computer and using them (PlayMemories Home) .....................................
Introduction of functions This section introduces some frequently used shooting functions and other unique functions. See the pages in parentheses for details. Shooting functions used frequently Exposure Comp. (37) You can adjust the exposure to change the brightness of the entire image. Even when the shooting mode is set to M, you can adjust the exposure if the ISO sensitivity is set to [ISO AUTO]. ISO/Multi Frame NR (37) You can adjust the luminous sensitivity.
Introduction of functions Features of this camera Shooting still images in 42 megapixels (69) You can shoot still images with extremely high resolution. Shooting with the viewfinder (22) You can shoot images with the built-in pop-up viewfinder. Low pass filter effect (72) You can change the level of the low pass filter effect according to your subject. Fast and accurate auto focus (70) Enables faster and more accurate auto focus combining contrast AF and phase detection AF that detects 399 points.
Before use Notes on using your camera Screen language You can select the language displayed on the screen using the menu (page 44). Shooting procedure This camera has 2 modes for monitoring subjects: the monitor mode using the monitor, and the viewfinder mode using the viewfinder. Functions built into this camera This camera is compatible with 1080 60p or 50p-format movies. Unlike standard recording modes up to now, which record in an interlacing method, this camera records using a progressive method.
Notes on using your camera ZEISS lens The camera is equipped with a ZEISS lens which is capable of reproducing sharp images with excellent contrast. The lens for the camera has been produced under a quality assurance system certified by ZEISS in accordance with the quality standards of ZEISS in Germany. • Magnets are attached to the camera body and the back of the monitor.
Notes on using your camera • Do not use an external flash with a high voltage flash sync terminal or inverse polarity. This may result in malfunction. Notes on shooting with the viewfinder This camera is equipped with an Organic Electro-Luminescence viewfinder with high resolution and high contrast. This viewfinder achieves a wide viewing angle and a long eye relief. This camera is designed to provide an easily viewable viewfinder by appropriately balancing various elements.
Notes on using your camera Warning on copyright • Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws. • To prevent [Copyright Info] from being used illegally, leave [Set Photographer] and [Set Copyright] blank when you lend or transfer the camera. • Sony bears no responsibility for any trouble or damage caused by unauthorized use of [Copyright Info].
Before use Checking the supplied items The number in parentheses indicates the number of pieces. • Camera (1) • AC Adaptor (1) • Lens cap (1) The shape of the AC Adaptor may differ depending on the country/ region. • Battery charger (1) • Power cord (mains lead) (1) (supplied in some countries/ regions) • Rechargeable battery pack NPBX1 (1) • Micro USB cable (1) • Shoulder strap (1) For how to attach the shoulder strap to the camera, refer to page 19.
Identifying parts See the pages in parentheses for details on operation for the parts.
Identifying parts Rear side A Eye sensor B (Playback) button (64) C Control dial (32) D MOVIE button (63) E Control wheel (32) F Wi-Fi antenna (built-in) G FINDER (Viewfinder pop-up) switch (22) H Light sensor I Monitor (25) • You can adjust the monitor to an easily viewable angle and shoot from any position. GB 18 • You may not be able to adjust the monitor angle depending on the type of a tripod you use. In such a case, release the tripod screw once to adjust the monitor angle.
Identifying parts Top side/Side view Before use A Shutter button (61) B Exposure compensation dial (29) C C1 (Custom 1) button (29) D Hooks for shoulder strap • Attach both ends of the strap onto the camera. E (N mark) • This mark indicates the touch point for connecting the camera and an NFC-enabled Smartphone. For details on the location of the (N mark) on your Smartphone, refer to the operating instructions of the Smartphone.
Identifying parts • NFC (Near Field Communication) is an international standard of shortrange wireless communication technology. F ON/OFF (Power) switch (57) G Built-in microphone*1 H Mode dial (67) I Multi interface shoe*2 • When the viewfinder is popped up, some accessories may not be attached. In that case, use the camera with the viewfinder pushed down. • Some of the accessories may not be inserted fully and protrude backward from the Multi interface shoe.
Identifying parts Bottom view Before use A Battery lock lever B Battery insertion slot (48) C Memory card slot (54) D Access lamp E Tripod socket hole • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.
Using the viewfinder 1 Slide down the FINDER FINDER (viewfinder pop-up) switch (viewfinder pop-up) switch to raise the viewfinder. 2 Adjust the diopter-adjustment Diopter-adjustment slider slider until the display appears clearly in the viewfinder. To store the viewfinder Push down the top of the viewfinder. Notes • Be careful not to push down on the viewfinder when it is being raised. • When storing the viewfinder, push it down slowly to keep the eyepiece from getting stuck in the process.
Using the viewfinder Switching between the viewfinder and the monitor The displays on the viewfinder and monitor may differ depending on the viewfinder status and the [FINDER/MONITOR] setting (page 40).
Using the viewfinder 2 Make sure that the end of the eyepiece cup screw is not sticking out of the frame. • If the screw is sticking out of the frame, loosen the screw. End of the screw 3 While holding the eyepiece between your fingers, insert the eyepiece cup into the eyepiece. • Insert the eyepiece cup until it pops in. 4 Tighten the screw to lock the eyepiece cup in place. To remove the eyepiece cup Loosen the eyepiece cup screw and remove the eyepiece cup.
List of icons on the monitor The status of the monitor is set to [Display All Info.] in the default settings. When you change the [DISP Button] setting, and press DISP on the control wheel, the screen status will change to the viewfinder mode. You can also display the histogram by pressing DISP. The displayed contents and their position shown below are just a guideline, and may differ from the actual display.
List of icons on the monitor A Display Display Indication Shooting mode (67) P P* A S M Indication 120p 60p 60i Frame rate of movies 30p 24p (36) 100p 50p 50i 25p Image size of movies (36) Remaining battery (51) Register number (67) Scene Recognition icons Remaining battery warning USB power supply (52) Flash charge in progress Setting Effect OFF (40) NO CARD Memory card (54)/ Upload (43) AF Illuminator (37) NFC is activated Airplane Mode 100 Remaining number of recordable images Aspect ratio
List of icons on the monitor Display Indication Display Indication AF area (70) 100-0003 Folder - file number Face Detection/Smile Shutter (38) - Protect (43) XAVC S HD AVCHD MP4 Recording mode of movies DPOF DPOF set Metering mode (37) AWB Auto Object Framing Dual Video REC (36) White balance (Auto, Preset, Custom, Color temperature, Color filter) (37) 7500K A5 G5 D-Range Optimizer/ Auto HDR (71) PC Remote Bright Monitoring Write Copyright Information (44) LPF Effect (72)/LPF Effect swit
List of icons on the monitor Display Indication Display Indication Focus peaking (40) 3/7 File number/Number of images in the view mode Spot metering area C Smart Telecon. Display Indication z Lock-on AF Lock-on AF guide Bracket indicator Exposure compensation (37)/Metered Manual STBY Movie recording standby REC 0:12 Recording time of the movie (m:s) z Focus 1/250 Shutter speed F3.
Functions list Functions that can be operated using the buttons/dials You can set up or operate various functions using these buttons/dials. For the location of the buttons/dials, see “Identifying parts” (page 17). Mode dial (67) Switches the shooting mode. MENU button (35) Displays the menu screen for setting menu items. MOVIE button (63) Records movies. button (65) Fixes the exposure of the entire screen./Scales an image up when viewing images.
How to use the Quick Navi screen Using the Quick Navi screen, you can change settings directly on the recording information display when the screen mode is set to [For viewfinder] (Quick Navi). 1 MENU button t (Custom Settings) t [DISP Button] t [Monitor] t [For viewfinder] t [Enter] 2 Press the DISP on the control wheel to set the screen mode to [For viewfinder]. 3 Press the Fn button to switch to the Quick Navi screen.
How to use the Quick Navi screen 5 Set the item by turning the control wheel. • Some setting values can be finely adjusted by turning the control dial. • Pressing the center of the control wheel turns on the designated screen used to set up the selected item (page 32). • Pressing the Fn button again turns off the Quick Navi screen and the screen goes back to the original one. Functions available on the Quick Navi screen Flash Mode Flash Comp. Focus Area Exposure Comp.
Operating the camera How to use the control wheel • You can turn the control wheel or press up/down/left/right on the control wheel to move the selection frame. Press z in the center of the control wheel to set the selected item. In this manual, the action of pressing the up/down/left/right side of the control wheel is indicated by v/V/b/B. • The function to switch the display (DISP) is assigned to v on the control wheel.
Selecting a function using the Fn (Function) button You can register frequently used functions to the Fn (function) button and recall them while shooting. Up to 12 frequently used functions can be registered to the Fn (Function) button. 1 Press the DISP on the control wheel to set the screen mode to other than [For viewfinder]. Functions list 2 Press the Fn button. 3 Select the desired item using v/V/b/B on the control wheel.
Selecting a function using the Fn (Function) button To set the individual settings in the dedicated screen In step 3, select a setting item and press z on the control wheel to switch to the dedicated screen for the setting item. Set the items according to the Operation guide. Operation guide Functions that can be registered using the Fn (Function) button You can select the functions to be displayed when you press the Fn (Function) button. MENU button t (Custom Settings) t [Function Menu Set.
Functions that can be selected using the MENU button You can set up the basic settings for the camera as a whole, or execute functions such as shooting, playback, or other operations. 1 Press the MENU button to display the menu screen. 2 Select the desired setting item using Functions list v/V/b/B on the control wheel or by turning the control wheel, and then press z on the center of the control wheel.
Functions that can be selected using the MENU button (Camera Settings) Image Size Selects the size of still images. (L: 42M/M: 18M/S: 11M (3:2) L: 38M/M: 16M/S: 9.4M (4:3) L: 36M/M: 15M/S: 8.9M (16:9) L: 28M/M: 12M/S: 7.1M (1:1)) Aspect Ratio Selects the aspect ratio for still images. (3:2/4:3/16:9/1:1) Quality Sets the image quality for still images. (RAW/RAW & JPEG/Extra fine/Fine/Standard) RAW File Type Selects the file type for RAW images.
Functions that can be selected using the MENU button Sets self-timer shooting in bracket mode, shooting order for exposure bracketing, and white balance bracketing. (Selftimer during Brkt/Bracket order) Flash Mode Sets the flash settings. (Flash Off/Autoflash/Fill-flash/Slow Sync./Rear Sync./ Wireless) Flash Comp. Adjusts the intensity of flash output. (-3.0EV to +3.0EV) Red Eye Reduction Reduces the red-eye phenomenon when using flash. (On/Off) Focus Area Selects the area of focus.
Functions that can be selected using the MENU button Picture Effect Shoots images with a texture unique to the selected effect. (Off/Toy Camera/Pop Color/Posterization/Retro Photo/Soft High-key/Partial Color/High Contrast Mono./Soft Focus/ HDR Painting/Rich-tone Mono./Miniature/Watercolor/ Illustration) Zoom Sets the zoom scale for Clear Image Zoom and Digital Zoom. Focus Magnifier Enlarges the image before shooting so that you can check the focus.
Functions that can be selected using the MENU button SteadyShot Sets SteadyShot for shooting movies. Reduces blur from camera shake when shooting while holding the camera. (On/Off) Color Space Changes the range of reproducible colors. (sRGB/AdobeRGB) Auto Slow Shut. Sets the function that automatically adjusts the shutter speed following the brightness of the environment in movie mode. (On/Off) Sets whether to record audio when shooting a movie.
Functions that can be selected using the MENU button DISP Button Sets the type of information to be displayed on the monitor or in the viewfinder by pressing DISP on the control wheel. (Monitor/Finder) Peaking Level Enhances the outline of in-focus ranges with a specific color when focusing manually. (High/Mid/Low/Off) Peaking Color Sets the color used for the peaking function. (Red/Yellow/White) Exposure Set. Guide Sets the guide displayed when exposure settings are changed in the shooting screen.
Functions that can be selected using the MENU button AEL w/ shutter Sets whether to adjust the exposure by pressing the shutter button halfway down. This is convenient when you want to adjust the focus and exposure separately. (Auto/On/Off) Sets whether to reflect exposure compensation value to flash compensation. (Ambient&flash/Ambient only) Reset EV Comp. Sets whether to retain the exposure value set without using the exposure dial, or reset the exposure value to 0 when you turn off the camera.
Functions that can be selected using the MENU button MOVIE Button Enables or disables for the MOVIE button. (Always/Movie Mode Only) Dial / Wheel Lock Sets whether to disable the control dial or control wheel by pressing and holding down the Fn button. (Lock/Unlock) (Wireless) Send to Smartphone Transfers images to display on a smartphone. (Select on This Device/Select on Smartphone) Send to Computer Backs up images by transferring them to a computer connected to a network.
Functions that can be selected using the MENU button (Playback) Deletes an image. (Multiple Img./All in this Folder/All with this date) View Mode Plays back images from a specified date or specified folder of still images and movies. (Date View/Folder View(Still)/Folder View(MP4)/AVCHD View/XAVC S HD View) Image Index Displays multiple images at the same time. (9 Images/25 Images) Display Rotation Sets the playback direction of the recording image. (Auto/Manual/Off) Slide Show Shows a slide show.
Functions that can be selected using the MENU button Tile Menu Sets whether to display the tile menu every time you press the MENU button. (On/Off) Mode Dial Guide Turns the mode dial guide (the explanation of each shooting mode) on or off. (On/Off) Delete confirm. Sets whether Delete or Cancel is preselected in the Delete confirmation screen. (“Delete” first /“Cancel” first) Display Quality Sets the display quality.
Functions that can be selected using the MENU button Sets the method used to assign file numbers to still images and movies. (Series/Reset) Select REC Folder Changes the selected folder for storing still images and movies (MP4). New Folder Creates a new folder for storing still images and movies (MP4). Folder Name Sets the folder format for still images. (Standard Form/Date Form) Recover Image DB Recovers the image database file and enables recording and playback. Display Media Info.
Using the In-Camera Guide You can use [Custom Key(Shoot.)] to assign In-Camera Guide to the desired button. The In-Camera Guide displays explanations for the currently selected menu function or setting. MENU button t (Custom Settings) t [Custom Key(Shoot.)] t Select the desired button assigned to the function. t [InCamera Guide] Press the MENU button and use the control wheel to select a MENU item whose explanation you want to read, and then press the button to which [In-Camera Guide] is assigned.
Preparing the camera Charging the battery pack When using the camera for the first time, be sure to charge the battery pack. The charged battery pack is discharged little by little, even when you do not use it. To avoid missing an opportunity to shoot, charge the battery pack again before you shoot. Charging the battery pack using the battery charger 1 Insert the battery pack into the battery charger.
Charging the battery pack Notes • If the CHARGE lamp does not light up, check if the battery pack is firmly attached to the battery charger, and then disconnect and reconnect the micro USB cable. • Connect the battery charger directly to the computer, not via a USB hub, etc. Charging the battery pack using the camera 1 Set the ON/OFF (Power) switch to OFF. 2 Slide the lever to open the cover. 3 Insert the battery pack completely, using the tip of the battery to press the lock lever.
Charging the battery pack 4 Close the cover. 5 Connect the camera to the AC Adaptor (supplied) using the micro USB cable (supplied), and connect the AC Adaptor to the wall outlet (wall socket). Preparing the camera The charge lamp lights orange, and charging starts. • Turn off the camera while charging the battery. • If the charge lamp lights up and then immediately turns off, the battery pack is fully charged.
Charging the battery pack Notes • If the charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).
Charging the battery pack Charging by connecting to a computer The battery pack can be charged by connecting the camera to a computer using a micro USB cable. Connect the camera to the computer with the camera turned off. Checking the remaining battery charge A remaining charge indicator appears on the screen. High Low Notes • The remaining charge indicator may not be correct under certain circumstances.
Charging the battery pack Supplying power from a wall outlet (wall socket) You can use the camera while power is supplied from a wall outlet (wall socket) by using the AC Adaptor (supplied). 1 Insert the battery pack into the camera (page 48). 2 Connect the camera to a wall outlet (wall socket) using the micro USB cable (supplied) and the AC Adaptor (supplied). Notes • The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera.
Charging the battery pack To remove the battery pack Turn off the camera. Slide the lock lever after confirming that the access lamp (page 21) is off, and remove the battery pack. Be sure not to drop the battery pack.
Inserting a memory card (sold separately) 1 Slide the lever to open the cover. 2 Insert the memory card. • With the notched corner facing as illustrated, insert the memory card until it clicks into place. Ensure the notched corner faces correctly. 3 Close the cover. To remove the memory card Make sure that the access lamp (page 21) is not lit, then push the memory card in once.
Inserting a memory card (sold separately) Formatting the memory card When you use a memory card with the camera for the first time, it is recommended that you format (initialize) the card on the camera for more stable performance of the memory card. • Formatting will erase all data on the memory card permanently, and is irreversible. Save valuable data on a computer, etc. • To perform formatting, select MENU button t (Setup) t [Format].
Inserting a memory card (sold separately) Notes • Not all memory cards are guaranteed to operate correctly. For memory cards produced by manufacturers other than Sony, consult the manufacturers of the products. • When using Memory Stick Micro media or microSD memory cards with this camera, make sure to use with the appropriate adaptor. • Images recorded on an SDXC memory card cannot be imported to or played on computers or AV devices that are not compatible with exFAT*.
Setting the language and the clock When you turn the camera on for the first time or after you initialize the functions, the language, date and time setting screen will appear. 1 Set the ON/OFF (Power) switch to ON to turn on the camera. A screen will appear that lets you set the language to be used on the monitor. • To turn the camera off, set the ON/ OFF (Power) switch to OFF. Preparing the camera 2 Select a desired language, then press z on the control wheel.
Setting the language and the clock To cancel the date and time setting operation Press the MENU button. Checking or resetting the date/time and area The date and time setup screen appears automatically when the power is turned on for the first time or when the internal rechargeable backup battery has been discharged. To reset the date and time, use the menu.
Shooting a clear image without camera shake “Camera shake” refers to unwanted movement of the camera that occurs after the shutter button has been pressed, resulting in a blurred image. Holding the camera properly Stabilize your upper body and take a position that keeps the camera from moving. Viewfinder mode (vertical position) Monitor mode Preparing the camera Viewfinder mode Point 1 One hand holds the grip of the camera, and the other hand supports the lens.
Shooting a clear image without camera shake SteadyShot function for movie shooting This camera is equipped with the SteadyShot function, which reduces camera shake during movie recording. The SteadyShot function is activated only when recording movies. MENU button t (Camera Settings) t [ Select the desired setting. SteadyShot] t Notes • The SteadyShot function is available only for movie shooting. You cannot use the SteadyShot function for shooting still images.
Shooting and viewing images Shooting still images In [Auto Mode], the camera analyzes the subject and allows you to shoot with the appropriate settings. 1 Set the ON/OFF (Power) switch to ON to turn on the camera. 2 Set the mode dial to (Auto Mode). Shooting and viewing images 3 Hold the camera, and then decide on your composition. 4 Press the shutter button halfway down to focus. • When the image is in focus, the z or indicator lights. 5 Press the shutter button fully down to shoot an image.
Shooting still images Shooting techniques • When you turn the macro switching ring to “0,2m-0,35m,” the camera is set to macro mode. The shortest shooting distance is approximately 0.2 m (0.65 ft.). Macro mode is suitable for shooting close-ups of subjects such as flowers or food.
Recording movies 1 Press the MOVIE button to start recording. • Since the [MOVIE Button] is set to [Always] in the default setting, movie recording can be started from any shooting mode. MOVIE button 2 Press the MOVIE button again to stop recording. GB 63 Shooting and viewing images Notes • The sound of the camera in operation may be recorded while recording a movie. You can disable the sound recording by setting [Audio Recording] to [Off] (page 39).
Playing back images 1 Press the button. button 2 Select an image by pressing the b/B on the control wheel. • To play back movies, press z on the control wheel. If you press V on the control wheel while playing back a movie, the control panel will be displayed. Control panel Action during movie playback N Playback X Pause M Fast forward m Fast rewind T Forward slow playback t Rewind slow playback > Next movie .
Playing back images Switching between still images and movies To play back still images, set [View Mode] to [Folder View(Still)], and to play back movies, set [View Mode] to [Folder View(MP4)], [AVCHD View] or [XAVC S HD View]. When you select [Date View], both still images and movies will be displayed on the screen, sorted by date. MENU button t desired mode.
Deleting images Once you have deleted an image, you cannot restore it. Be sure that you want to delete the image before proceeding. 1 While displaying the image you want to delete, press the (Delete) button. (Delete) button 2 Select [Delete] with v/V on the control wheel, then press z. • To delete several images at a time, select MENU button t t [Delete]. Notes • Protected images cannot be deleted.
Selecting a shooting mode Selecting a shooting mode Turn the mode dial and set to the desired shooting mode. The following shooting modes are available. (Auto Mode) Allows you to shoot still images with the settings adjusted automatically. (Program Auto) Shoots by adjusting the aperture and changing the focus range, or by defocus the background. (Shutter Priority) Adjusts the shutter speed to show the movement of the subject.
Functions available for each shooting mode The functions you can use depend on the selected shooting mode. In the table below, indicates the function is available, and a – indicates the function is not available. Shoot Mode Exposure Cont. Self-timer Comp. Shooting Face Smile Detection Shutter Auto Obj.
Various functions Using the various functions This manual mainly provides an introduction on the use of the camera and a list of functions. To learn more about the camera, refer to “Help Guide” (page 2), which offers in-depth instructions on the many functions. Image Size (still image) The larger the image size, the more detail will be reproduced when the image is printed on large-format paper. The smaller the image size, the more images can be recorded.
Using the various functions Auto focus functions [Focus Mode]: You can select the focus method to suit the movement of the subject. Set the focus mode dial to S (Singleshot AF) or C (Continuous AF). Focus mode dial S (Single-shot AF) The product locks the focus when the focus adjustment is achieved. Use this when the subject is motionless. C The product continues to focus while the shutter button is pressed (Continuous AF) and held halfway down. Use this when the subject is in motion.
Using the various functions (Lock-on AF) When the shutter button is pressed and held halfway down, the product tracks the subject within the selected autofocus area. Point the cursor to [Lock-on AF] on the [Focus Area] setting screen, then select the desired tracking start area using the left/ right sides of the control wheel. You can move the tracking start area to any desired point by designating the area as a flexible spot or an expanding flexible spot.
Using the various functions [Auto HDR]: Shoots 3 images with different exposures, and then overlays the correctly exposed image, the bright areas of an under exposed image and the dark areas of an over exposed image to create an image with rich gradation. LPF Effect This camera is equipped with an optical variable low pass filter. By changing the low pass filter effect settings according to your subject, you can choose whether to prioritize the resolution or to reduce moiré patterns and false colors.
Using Wi-Fi functions Using the Wi-Fi and NFC one-touch functions You can perform the following operations using the camera’s Wi-Fi and NFC One-touch functions. Saving images to a computer. Transferring images from the camera to a smartphone. Using the smartphone as a remote control for the camera. Viewing still images on a TV.
Using the Wi-Fi and NFC one-touch functions Connecting the camera to a wireless access point Connect the camera to your wireless access point. Before starting the procedure, make sure you have the SSID (name of the access point) and password of your wireless access point with you. 1 MENU button t (Wireless) t [Access Point Set.] 2 Use v/V on the control wheel to select the access point you want to connect to.
Using applications Adding applications to the camera (PlayMemories Camera Apps) You can add the desired functions to your camera by connecting to the application downloading website (PlayMemories Camera Apps) via the Internet. Downloading applications 1 Access the application downloading website. http://www.sony.net/pmca/ • For more information on the computer environment required for downloading, refer to the application download website.
Adding applications to the camera (PlayMemories Camera Apps) How to download applications directly using the Wi-Fi function of the camera You can download applications using the Wi-Fi function without connecting to a computer. Select MENU button t (Application) t [Application List] t (PlayMemories Camera Apps), then follow the instructions on the screen to download applications. • Acquire a service account in advance. • Select MENU button t (Wireless) t [Access Point Set.
Using a computer Developing RAW images (Image Data Converter) With Image Data Converter, you can do the following: • You can play back and edit images recorded in RAW format with various corrections, such as tone curve and sharpness. • You can adjust images with white balance, exposure, and [Creative Style], etc. • You can save the images displayed and edited on a computer. You can either save the image as RAW format or save it in a general file format.
Importing images to your computer and using them (PlayMemories Home) The software PlayMemories Home allows you to import still images and movies to your computer and use them. PlayMemories Home is required for importing XAVC S movies or AVCHD movies to your computer.
Importing images to your computer and using them (PlayMemories Home) • Movies recorded using the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i 24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [ Record Setting] are converted by PlayMemories Home to create an AVCHD recording disc. This conversion can take a long time. Also, you cannot create a disc with the original image quality. If you want to keep the original image quality, store your movies on a Blu-ray Disc.
Controlling the camera using your computer (Remote Camera Control) Connect the camera to your computer. With Remote Camera Control you can: • Set up the camera or record an image from the computer. • Record an image directly to the computer. • Perform an Interval Timer Shooting.
Others Checking the number of images and recordable time of movies When you insert a memory card into the camera and set the ON/OFF (Power) switch to ON, the number of images that can be recorded (should you continue to shoot using the current settings) is displayed on the screen. Notes • When “0” (the number of recordable images) flashes in yellow, the memory card is full. Replace the memory card with another one, or delete images from the current memory card (pages 43, 66).
Checking the number of images and recordable time of movies The number of images that can be recorded using a battery pack Note that the actual numbers may differ depending on the conditions of use. Shooting (still images) Actual shooting (movies) Continuous shooting (movies) Viewing (still images) Monitor Viewfinder Monitor Viewfinder Monitor Viewfinder Battery life — — Approx. 30 min. Approx. 30 min. Approx. 50 min. Approx. 50 min. Approx. 170 min. Number of images Approx. 220 images Approx.
Checking the number of images and recordable time of movies Available recording time for a movie The table below shows the approximate total recording times using a memory card formatted with this camera. The recording time for XAVC S and AVCHD movies is the recording time when shooting with [Dual Video REC] set to [Off].
Checking the number of images and recordable time of movies Notes • The recordable time of movies varies because the camera is equipped with VBR (Variable Bit-Rate), which automatically adjusts image quality depending on the shooting scene. When you record a fast-moving subject, the image is clearer but the recordable time is shorter because more memory is required for recording. The recordable time also varies depending on the shooting conditions, the subject or the image quality/size settings.
Specifications Camera [Image sensor] Image format: 35 mm full size (35.9 mm × 24.0 mm), CMOS image sensor Effective pixel number of camera: Approx. 42 400 000 pixels Total pixel number of camera: Approx. 43 600 000 pixels [Auto focus system] System: Phase detection system/ Contrast detection system [Electronic viewfinder] Type: Electronic viewfinder Total number of dots: 2 359 296 dots Frame coverage: 100% Magnification: Equivalent to approx. 0.74 × with 50 mm lens, at infinity, –1 m–1 Eye Point: Approx.
Specifications Movie (AVCHD format): AVCHD format Ver. 2.0 compatible Video: MPEG-4 AVC/H.264 Audio: Dolby Digital 2ch, equipped with Dolby Digital Stereo Creator • Manufactured under license from Dolby Laboratories. Movie (MP4 format): Video: MPEG-4 AVC/H.264 Audio: MPEG-4 AAC-LC 2ch [Recording media] Memory Stick media, SD card • For details, refer to “Memory cards that can be used” (page 55). [Input/output terminals] Multi/Micro USB Terminal*: Hi-Speed USB (USB 2.
Specifications Battery charger BC-DCX On image data compatibility Input rating: DC 5 V Output rating: 4.2 V DC, 0.86 A Operating temperature range: 0°C to 40°C (32°F to 104°F) Storage temperature range: –20°C to +60°C (–4°F to +140°F) • This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).
Specifications Trademarks • Memory Stick and are trademarks or registered trademarks of Sony Corporation. • XAVC S and are registered trademarks of Sony Corporation. • “AVCHD Progressive” and the “AVCHD Progressive” logotype are trademarks of Panasonic Corporation and Sony Corporation. • Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Index Index A E Area Setting ............................... 58 AUTO ........................................ 61 Auto Mode ................................. 61 Exposure compensation dial ...... 29 Eye sensor .................................. 18 Eyepiece cup .............................. 23 B F Battery pack ............................... 47 Fn ......................................... 33, 34 Focus Area ................................. 70 Focus Magnif. Time ................... 39 Focus Mode.......
Index M S Macro switching ring..................62 Memory card ........................54, 55 Memory recall ............................67 MENU ........................................35 Microphone jack .........................20 Monitor .......................................25 MOVIE .......................................63 MOVIE Button ...........................63 Multi interface shoe ....................20 Scene Selection .......................... 38 Set the clock...............................
Index Index GB 91
Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.
