User manual
Table Of Contents
- Table of contents
- Introduction of functions
- Before use
- Functions list
- Preparing the camera
- Shooting and viewing images
- Selecting a shooting mode
- Various functions
- Using Wi-Fi functions
- Using applications
- Using a computer
- Others
- Index
Charging the battery pack
Preparing the camera
GB
49
4 Close the cover.
5 Connect the camera to the AC Adaptor (supplied) using the
micro USB cable (supplied), and connect the AC Adaptor to the
wall outlet (wall socket).
The charge lamp lights orange, and
charging starts.
• Turn off the camera while charging
the battery.
• If the charge lamp lights up and then
immediately turns off, the battery
pack is fully charged.
• When the charge lamp flashes and
charging is not finished, remove and
re-insert the battery pack.
• For some countries/regions, connect
the power cord to the AC Adaptor
and then connect the AC Adaptor to a
wall outlet (wall socket).
Charge lamp
Lit: Charging
Off: Charging finished
Flashing:
Charging error or charging paused
temporarily because the camera is
not within the proper temperature
range