Manual
TV
To VIDEO/SAT
(AUDIO IN)
To connect the AUDIO OUT jacks of a TV to the VIDEO/SAT (AUDIO IN)
jacks of this system
Connect a TV to the VIDEO/SAT (AUDIO IN) jacks using an audio cord (not supplied). When
connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks onthe components.
White (L/audio)
Red (R/audio)
• Be sine to make connections secmely to avoid hum and noise If using the VIDEO/SAT jacks distorts the sound,
change the attenuate setting (page 67)
• If your TV does not have AUDIO OUT jacks, you cannot output the TV sound fiom the speakers of this system.
• If you connect a 2A: to the VIDEO/SAT (AUDIO IN) jacks, other components, such as a VCR, cannot be
connected
r_
• To listen to the TV sound, select the flmction by pressing FUNCTION. For details, see page 57.
• When you want to output the TV sound or stereo sound ofa 2 channel source flora the 6 speakers, select any solmd
field other than "AUTO FORNLCT DIRECT AUTO" or "2 CHANNEL STEREO" (page 55).
• When you select the "NIGHT" solmd field (page 55), the sound is output flora the front speakers only.
22cs