Manual
26G8
Follow the steps below to make the minimum
number of basic ac_iustments for using the
system.
To skip an adjustment, press I_'IIHTo return to
the previous acliustment, press I'_.
3
4
• Disconnect the headphone when you pertbzm
the Quick Setup You cannot operate steps after
11with the hea@hone connected
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUI(K SETUP.[
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 27).
• When you press CLEAR in message, the
message disappears. When you need to perform
the Quick Setup, see "To recall the Quick Setup
display" (page 27)
Press ENTER without inserting a disc.
The Setup Display _r selecting _e
language used in the on-screen display
appears.
Press ,t,/4, to select a language.
The system displays the menu and subtitles
in the selected language.
rm_
• The selectable language is different depending
Oil the area.
Press ENTER.
The Setup Display _r selecting the aspect
ratio of the TV to be connected appears.
SETUP
Press .1'/4,to select the setting that
matches your TV type.
• If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN S(AN]
(page 73)
• If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 73)
Press ENTER.
The Setup Display _r selecting the speaker
distance appears.
Press ,t,/4, to select the front speaker
distance from the listening position,
then press ENTER.
You can set from 1.0 to 7.0 meters (4 to 23
ft).