Manual
[SCREEN SETUP]
Choose settings according to the TV to be
connected.
[4:3 LETTER BOX]
[4:3 PAN SCAN]
Select [SCREEN SETUP] m the Setup Display.
To use the display, see "Using the Setup
Display" (page 71).
The default settings are underlined.
SCREEN SETUP
• [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
The defauh setting varies, depending on the
country model.
[4:3 LETTER Select this when you connect a 4:3
BOX] screen TV. Displays a wide picture
with bands on the uppei and lower
portions of the screen.
[4:3 PAN SCAN] Select this when you connect a 4:3
screen TV. Automatically displays
the wide pictme on the entire
screen and cuts off the pin,ions
that do not fit
[16:9] Select this when you connect a
wide-screen TV or a TV with a
wide mode fimction
[16:9]
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of[4:3 PAN SCAN] or
vice versa.
• [COLOR SYSTEM] (Asian, Australian,
and Saudi Arabian models only)
Select the color system when you play a VIDEO
CD.
[AUTO] Outputs the video signal in the
systeln of the disc, either PAL or
NTSC If your TV uses a DUAL
system, select [AUTO]
[PAL] Changes the video signal of an
NTSC disc and outputs it in the
PAL system
[NTSC] Changes the video signal of a PAL
disc and outputs it in the NTSC
systeln.
• You cannot change the color system of the disc itself
• On Asian and Ausualian models, you can change the
color system of this unit according to the connected
TV.
• [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a (D or DATA (D (MP3
audio) for more than 15 minutes. The screen saver
will help prevent your display device from
becoming damaged (ghosting). Press _ to mm
off the screen saver.
>
€-
3
[ON]
Turns Ol1the screen savei
continued
73G8