Manual

1.0 - 7.0 m/
4 - 23 ft
0,0 _]7.0 m/
0 - 23 ft
Be sure to change the value in the Setnp Display
when yon move the speakers.
[FRONT]
3.0 roll0 ft*
Front speaker distance fiom the
listening position can be set in 02
meter (1 ft) increments flora 1.0 to
7.0 metels (4 to 23 fl).
[CENTER]
3.0 m/10 ft*
(appears when
you set
[(;ENTER[ to
[Y'ES] in the
[SIZE] setting.)
Center speaker distance fiom the
listening position can be set in 02
meter (1 ft) increments flora 0.0 to
7.0 metels (0 to 23 fl).
[SURROUND]
3.0 roll0 ft*
(appeals except
when VOtlset
[SURROUND]
to [NONE] in die
[SIZE] setting.)
Sunound speake! distance from the
listening position can be set in 02
meter (1 ft) increments flora 0.0 to
7.0 metezs (0 to 23 fl).
* When you peitbrm the Quick Se0lp (page 26), the
defimlt settings are changed
• When you set the distance, the sound cuts off for a
tllolnent.
• If all flont and snnound speakers are not placed at an
equal distance flom your listening position, set the
distance according to the closest speaker.
• Do not place the smTound speakers fa*ther away from
your listening position than the fiont speakers
• Depending on the input stream, the [DISTANCE]
setting may not be effective
• [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE[ to [ON]
for easy adiustment.
[L]
0 dB
[R]
0 dB
Set this between 6 dB and 0 dB
in 1 dB increments
Set this between 6 dB and 0 dB
in 1 dB increments
[CENTER]
0 dB
(appears when you
set [(;ENTER] to
['iT S] izl tile [SIZE]
setting.)
Set this between 6 dB and +6 dB
in 1 dB increments
[SUBWOOFER] Set this between 6dBand+6dB
0 dB in 1 dB increments
• [LEVEL (SURROUND)]
Yon can valTv-the level of front speakers as
ibllows. Be sure to set [TEST TONE[ to [ON]
ibr easy adjustment.
(This settings appear except when you set
[SURROUND] to [NONE] in the [SIZE]
setting.)
[L] Set this between 6 dB and+6 dB in
0 dB 1 dB increments.
[R] Set this between 6 dB and+6 dB in
0 dB 1 dB increments.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOLUME +' on the remote.
• [TEST TONE]
The speakers will emit a test tone to at[just
[LEVEL (FRONT)] and [LEVEL
(SURROE_ND)].
€,Q
t_
t-
3
[OFF]
[ON]
The test tone is not emitted from the
speakers
The test tone is emitted from each speaker
in sequence while adjusting level When
you select one of the [SPEAKER SETUP[
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1 Press _3 DISPLAY when the system is
in stop mode.
con_nued
77cs