User Guide
Table Of Contents
- Welcome!
- About This Manual
- This System Can Play the Following Discs
- Guide to the Control Menu Display
- Getting Started
- Playing Discs
- Playing Discs
- Using the DVD’s Menu
- Selecting [ORIGINAL] or [PLAY LIST] on a DVD-RW
- Playing VIDEO CDs with PBC Functions (Ver.2.0)
- About MP3 Audio Tracks and JPEG Image Files
- Playing DATA CDs with MP3 Audio Tracks and JPEG Image Files
- Playing Audio Tracks and Images as a Slide Show with Sound
- Enjoying DivX® Videos
- Adjusting the Delay Between the Picture and Sound
- Searching for a Particular Point on a Disc
- Searching for a Title/ Chapter/Track/Scene, etc.
- Searching by Scene
- Viewing Information About the Disc
- Sound Adjustments
- Using Various Additional Functions
- Other Operations
- Settings and Adjustments
- Additional Information
Sound Adjustments
49
GB
Enjoying virtual surround
speakers
x VIRTUAL MULTI DIMENSION
Creates an array of virtual surround speaker
positions higher than the listener from a single
set of actual surround speakers.
This mode creates 5 pairs of virtual speakers
surrounding the listener at approximately a 30°
angle of elevation. The effect differs according
to the [BEHIND] or [SIDE] setting of the
surround speakers (page 67).
Outputting 2 channel sources
from the surround speakers
x MULTI ST.
This mode outputs 2 channel sources from the
front speakers and surround speakers
simultaneously. The sound that is output from
the surround speakers is same as the sound that
is output from the front speakers.
• When you select “MULTI ST.,” “LINK” lights up in
the front panel display.
Selecting a sound field for
music
x ROCK, POP, JAZZ, CLASSIC
The each mode provided sound to suit the
source.
Enjoying the sound at low
volume
x NIGHT
You can enjoy sound effects or dialog, as you
would in a movie theater, even at low volume. It
is useful for watching movies at night.
In this mode, the sound is output from the front
speakers only. When a 2 channel source is
played, this function is not effective.
Using only the front speaker
and subwoofer
x 2 CHANNEL STEREO
This mode outputs the sound from the front left
and right speakers and subwoofer. Standard 2
channel (stereo) sources completely bypass the
sound field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front left and right speakers and subwoofer.
To turn the surround effect off
Press SOUND FIELD repeatedly until “A.F.D.
AUTO” or “2CH STEREO” appears in the front
panel display.
L: Front speaker (left)
R: Front speaker (right)
SL: Surround speaker (left)
SR: Surround speaker (right)
: Virtual speaker
SL SR
LR
LR
SL
SR
[BEHIND]
[SIDE]
Tip