User Guide
Table Of Contents
- Welcome!
- About This Manual
- This System Can Play the Following Discs
- Guide to the Control Menu Display
- Getting Started
- Playing Discs
- Playing Discs
- Using the DVD’s Menu
- Selecting [ORIGINAL] or [PLAY LIST] on a DVD-RW
- Playing VIDEO CDs with PBC Functions (Ver.2.0)
- About MP3 Audio Tracks and JPEG Image Files
- Playing DATA CDs with MP3 Audio Tracks and JPEG Image Files
- Playing Audio Tracks and Images as a Slide Show with Sound
- Enjoying DivX® Videos
- Adjusting the Delay Between the Picture and Sound
- Searching for a Particular Point on a Disc
- Searching for a Title/ Chapter/Track/Scene, etc.
- Searching by Scene
- Viewing Information About the Disc
- Sound Adjustments
- Using Various Additional Functions
- Other Operations
- Settings and Adjustments
- Additional Information
66
GB
x [LINE]
Selects the output method for video signals from
the EURO AV T OUTPUT (TO TV) jack on
the rear panel of the system.
• If your TV does not accept RGB signals, no picture
appears on the TV screen even if you select [RGB].
Refer to the instructions supplied with your TV.
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
To use the display, see “Using the Setup
Display” (page 63).
The default settings are underlined.
x [PAUSE MODE] (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 64). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
[VIDEO]
Outputs video signals.
[RGB]
Outputs RGB signals.
Note
Custom Settings
[CUSTOM SETUP]
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
[OFF]
No priority given.
[AUTO]
Priority given.
Note
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO
PAUSE MODE:
OFF
TRACK SELECTION:
ON
AUDIO DRC:
STANDARD
DivX:
Registration Code