Manual

(_) Connecting the Speakers
Required cords
The connector and coh)r tube ollhe speaker cords are Ihe same color as the label of Ihe jacks to be
coRIlected.
• Do notcatchthe speakercord insulationin tileSPEAKERjack.
To avoid short-circuiting the speakers
Short-circuitiug of tile speakers ma> damage the s>stem. To prevent this, be sure to folh)w these
precautions when c(muecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Stripped speakercord is
touching another speaker
terminal,
Stripped cords are touching each
other due to excessive removal of
insulation.
Afler comlecting all the components, speakers, and AC power cord (mains lead), output a test tone to
check that all the speakers are connected correctly. For details on outputting a test tone, see page 79.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output fi'om a speaker
other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this
happens, check the speaker com_ectiou agaiu.
• Be sure to malch Ihe speaker coM Io the al)propriate lerminal on the componenls: @ Io @, and (_ to G. I f the cords
are reversed, the sound will lack bass and l]li]y be distorted.
(_) Connecting the TV
Required cords
_) Video cord
_ Yellow
_) Audio cord (not supplied)
_ hite (L/audio)
Red (R/audio)
14us