Manual

Follow Ihe sleps below to make the minimum
number el basic ad ustrnenls lk)r using lhe
systern.
© :a :}
© :
<2
:7
7
1 Turn on theTV.
2 Press |/@.
-- I/1_
0
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
10wilh the headphones connected.
• Make sure that the fimction is set to "DVD."
Switchthe input selectoron yourTV so
thatthe signal from the system
appears onthe TV screen.
[Press [ENTER]to run QUICK SETUP.]
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 19).
Press @ without inserting a disc.
The Setup Displa_ lot selecting tbe
language used in the on-screen display
appears.
5
6
7
8
9
Press -1,/,1,to select a language.
The system displays the menu and subtitles
in the selected language.
Press @.
The Setup Displa_ fur selecting the aspect
ratio of the TV to be connected appears.
Press .I,14.to select the setting that
matches your TV type.
• If you have a 4:3 standard TV
[4:3 LETTER BOX] or 14:3 PAN SCAN]
(page 75)
• If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 75)
Press @.
The Setup Displa2r for selecting the speaker
lormation appears.
Press <--/+ to select the speaker
formation image as the speakers are
actually positioned, then press @.
For details, see "Getting Optimal Surround
Sound for a Room" (page 69).
18.s