Manual

64us
By pressing Number TV's inputsource
MOVIE/ HDMI 4
MUSIC"
DYNAMIC HDMI 5
BASS"
,i. Except for North American models.
Operating for the THEATRE
SYNC function
PointtheremotetothedirectionofTVand this
system,then pressTHEATRESYNConce.
While tr:msmitting the code fromthe remote, tile
TV button flashes.
If this ftmction does not work, change the
transmit trine. The transmit trine varies
depending on the TV.
To change the transmit time
Press and hold TV CH +* while entering the
code for transmit time (see the table) using
the number buttons.
Tile transmit time from the remote is selected.
If you successfully set the transmit time code.
the TV button flashes twice slowly. If the selting
is unsuccessful, the TV button flashes 5 tflnes
quickly.
* Functions as both TV CH + and FUNCTION +
button.
By pressing
TV CH +
Number Transmit time
I 0.5 (Default)
2 1
3 1.5
4 2
5 2.5
6 3
7 3.5
8 4
• This flmction is only for SONY TVs (This flmction
may not work on some SONY TVs)
• If distance between TV and this system is too far, this
flmction may not work Install the system near the
TV
• Keep the remote pointed in the direction of the TV
and this system while the TV button is flashing
• Keep the remote pointed in the direction of the TV
and this system while entering the code
Reinforcing bass frequencies
You can reinl_)rce bass fl'equencies.
Press DYNAMIC BASS.
Bass l_equencies are eflcctivel_r reinforced
To turn off the sound effect
Press DYNAMI( BASS again.