Manual

• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
CALIBRATION].
• To set [AUTO CALIBRATION], you need to
connect the supplied calibration mic.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate tile
speakers which output sound.
• When you change tile [SIZE[ setting in [SPEAKER
SETUP], Ibe [SPEAKER FORMATION] setting
returns to [STANDARD].
(AUTO CALIBRATION)
D. C. A. C. (Digilal Cinema Aulo Calibralion)
can set the appropriale surround sound
automatically.
• Loud tesl sound is outpul when [AUTO
CALIBRATIONJ starls. You cannol turn Ihe "_'olume
down. Give consideration to children and neighbor.
1 Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
2 Press Q DISPLAY when the system is
in stop mode.
The Conlrol Menu appears.
3 Press "1"14,to select [SPEAKER
FORMATION], then press @.
Press .1,/4,to select [AUTO
CALIBRATION], then press @.
The options li_r [AUTO CALIBRATION]
appear.
<
I'D
3>
3
I'D
Connect the calibration mic to the A.CAL
MlCjack on the li'ont panel, and set it up at
the eat" level using a tripod, etc. (not
supplied). The l'ront oleach speaker should
continued_
71us