Manual

[SPEAKER SETUP]
To obtain lhe best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level and lhe
balance of the speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see "Using the Setup
Display" (page 73).
The delimit settings are underlined.
• You cannot operate these setup items when you
connect headphones to the system.
SPEAKERSETUP
m
• When you select an item, the sound culs off for a
moment.
• When you change the [SIZE] setting, the [SPEAKER
FORMATION] setting returns to [STANDARD].
• [DISTANCE (FRONTI]
The default distance setting for the speakers in
relation lo the listening position is shown below.
When you set the distance using the Quick Setup
(page 18), the settings is automatically
displayed.
/// ..........
0,0 - 7.0 m2)/
0-23 ft
2
2
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [SIZE] setting does not return to the
delhult setting.
• [SEE]
If _ou do not connect center or surround
speakers, or move the surround speakers, set the
parameters for [CENTER] and [SURROUND1.
Since the fi'ont speaker and subwoofcr setting is
fixed, you cannot change them.
[FRONT] [YES]
[CENTER] [YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND] [YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER] [YES]
Be sure Iochange the value in the Setup Display
when you move the speakers.
[L/R]
3.0 m/10 ft D
Front speaker distance from the
listening position can be set in
0.2 meter (l fl) increments from
0.0 to 7.0 meters 2/(0 to 23 fl).
[CENTER]
3.0 m/10 ffl )
(appears when )ou
set [CENTER] to
[YES] in tile [SIZE]
setling.)
Center speaker distance from the
listening position can be set in
0.2 meter (1 fl) increments from
0.//to 7.0 meters 2/Ill to 23 fl).
[SUBWOOFER]
3.0 m/10 ft 1)
Subwoofcr distance from the
listening position can be set in
0.2 meter (lfl) increments from
0.0 to 7.0 meters 2)(0 to 23 fl).
I)When you perlk_rm the Quick Setup (page 18), the
default settings are changed.
2)0.0 to 6.9 meters for North American models.
78us