Manual

• [DISTANCE (SURROUND)]
Tile delimit distance setting lk)rthe speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 18), the settings is atttomatically
displayed.
[CENTER]
0.0 dB
(appears when you
set [CENTERI 1o
[YESI in the [SIZE]
setting.)
Set this between 15.0 dB aM
+10./) dB in 1.0 dB incremenls.
[SUBWOOFER] Selthis between 15.0 dB aM
0,0 dB +10.0 dB in 1.0 dB incremenls.
• [LEVEL (SURROUND)]
You can vary thelevel of surroundspeakersas
folh)ws. Be sure to set [TEST TONE] to ION]
for easy adjustment.
[L/R]
0.0 dB
lappearswhen
you set
[SURROUND]to
[YES]m lhe
[SIZE]setting.)
Set Ibis between 15.0 dB and
+10.0 dB in 1.0 dB incremenls.
Be sure Io change the value in the Setup Display
wheu you move Ihe speakers.
[L/R]
3.0 m/lO ft"
lappears when you
set [SURROUND]
1o [YES] in lhe
[SIZE] setting.)
Surround speaker distance from
the listening position can be set in
1).2 meter (1 fi) increments from
/).0 to 7.0 meters"" (0 to 23 fit.
* When you perform tile Quick Setup (page 18), the
defauh seltings are changed.
,i,*0.0 Io 6.9 meters for North American models.
m
• When you set the distance, the sound cuts off for a
tiloment.
• Depending oll the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in tile
recommended range, ,_l"/.&_- *" m is displayed (":'_
being the number), z_l indicates over the
recommended distance. _1 indicates below.
• [LEVEL (FRONT)]
You can var_ the level of fronl speakers as
R)llows. Be sure to set [TEST TONE] to ION]
%r easy adjustment.
[L!R]
0,0 dB
Sel Ibis between 15.{)dB and
+10.0 dB in l./) dB incremenls.
To adjust the volume of all the
speakers at one time
Press VOLUME +/ on Ihe syslem, or press
VOLUME +/- on lhe remote.
• [TEST TONE]
The speakers will emit a test tone to adjusI
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
[ON]
Tile test tone is not emitted from the
speakers.
Tile test tone is emitted from each speaker
in sequence while a_liusting level. When
you select one of the ]SPEAKER SETUP]
items, the test tone is emitted fiom each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1 Press C3 DISPLAY when the system is
in stop mode.
The Conlrol Menu appears.
2 Press*14, to select [SETUP],
then press @.
The options for [SETUP] appear.
3 Press'l"/4, to select [CUSTOM], then
press @.
_>
Q.
<
ca
o
g
,,,I
,,,I
n
3
I'D
continued_
7gus