Manual
4
5
6
The Setup Display' appears.
Press I'-1,1,repeatedly to select
[SPEAKER SETUP], then press @ or
->.
Press .1,/4,repeatedly to select [TEST
TONE], then press @ or -.>.
Press .1"14,repeatedly to select [ON],
then press @.
You will hear file test tone Item each
speaker in sequence.
7 From your listening position,adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using ÷1.1"14,1->.
The test IOlle is ernitted Iron1 ()lily' tile
speaker which you are adjusting.
8 Press @ when you have finished
making adjustments.
g Press .1"/4,repeatedly to select [TEST
TONE], then press _).
10Press "1"/4,repeatedly to select [OFF],
then press @.
• When you a<!iust Ihe speaker scllings, the sound culs
ot'f for tl lnolnenl.
• The tesl lone signals are not OUll)Ut from file HDMI
OUT jack.
You can return Ihe system paramelers, such as
preset stalions, Io the defitult settings.
1/6 _ •
1
2
Press I/_) to turn on the system.
Press B, _, and I/_) on the system at
the same time.
"COLD RESET" appears in the li'ont panel
display and the delault settings are returned.
80us