HDMI Control Guide
Table Of Contents
- Using the HDMI CONTROL function for ‘BRAVIA’ Theatre Sync
- Preparing for HDMI CONTROL function
- Watching a DVD (One-Touch Play)
- Enjoying the TV sound from the speakers connected to the receiver (System Audio Control)
- Turning off the receiver with the TV (System Power Off)
- Troubleshooting
- Utilisation de la fonction HDMI CONTROL pour ‘BRAVIA’ Theatre Sync
- Préparatifs pour la fonction HDMI CONTROL
- Lecture d’un DVD (One-Touch Play)
- Profiter du son du téléviseur au moyen des enceintes raccordées à l’ampli-tuner
- Mise hors tension de l’ampli-tuner avec le téléviseur (System Power Off)
- Dépannage
5
GB
Watching a DVD
(One-Touch Play)
Play back a connected component.
The receiver and the TV are turned on
automatically and switch to the appropriate
HDMI input.
Note
Depending on the TV, the start of the content may
not be output.
Watching a DVD by simple
operation
You can also select a connected component,
such as a DVD/Blu-ray Disc Player using the
TV menu. In this case, the receiver and the TV
switch to the appropriate HDMI input.
Enjoying the TV sound
from the speakers
connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
If you turn on the receiver while the TV is
turned on, the System Audio Control function
will automatically be set to on and the TV
sound will output from the speakers connected
to the receiver. However, if you turn off the
receiver, the sound will output from the TV
speakers.
You can also operate this function using the
TV menu. For details, see the operating
instructions of the TV.
Notes
• When “CONTROL” is set to “CTRL ON”, the
“AUDIO” settings in the VIDEO menu will set
automatically depending on the System Audio
Control settings.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
• If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
Notes for models other than
STR-DG910
• When you switch to an input other than HDMI or
TV, the System Audio Control function will
automatically be set to off.
• If you switch from other input to HDMI or TV
input, the System Audio Control function will
automatically be set to on.