Operation Manual

16
DCR-HC17E/HC19E/HC21E/HC22E 2-586-501-11(1)
Step 6: Setting the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the CLOCK SET
screen appears every time you turn on your
camcorder.
• If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 83).
POWER switch
Skip to step 4 when you set the clock for
the first time.
1 Touch

[MENU].
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
AUTO SHTR
EXEC
RET.
2 Select (SETUP MENU) with
/ , then touch [EXEC].
SETUP MENU
CLOCK SET
USB STREAM
LANGUAGE
DEMO MODE
EXEC
RET.
-- : -- : --
3 Select [CLOCK SET] with
/ , then touch [EXEC].
CLOCK SET
Y M D H M
OK
2 0 0 5 1 1 0
:
0 0
4 Set [Y] (year) with / ,
then touch .
You can set any year up to the year
2079.
CLOCK SET
OK
Y M D H M
2 0 0 5 1 1 0
:
0 0
5 Set [M] (month), [D] (day), [H]
(hour) and [M] (minute), then
touch .
The clock starts.