Manual

Viewing the recording on TV
a
imlRlmJmmu lmm
Once you conned the AV cordless IR receiver (not supplied) to your "IV or VCR, you
can easily view the picture on your TV. For details, refer to the operating instructions of
theav cordlessIRreceiver.
LASER
LASER UNK
ll
Ca
¢r
I
(1) After connecting your TV and AV cordless IRreceiver, set the POWER switch
on the AV cordless IR receiver to ON.
(2) Turn the TV on and set the TV/VCR selector on the TV to VCR.
(3) Press LASER LINK. The lamp of LASER LINK lights up.
(4) Press _ on your camcorder to start playback.
(5) Point the LASER LINK emitter at the AV cordless IR receiver. Adjust the
position of your camcorder and the AV cordless IR receiver to obtain clear
playback pictures.
To cancel the laser link function
Press LASERLINK. The lamp on the LASERLINK button goes out.
If you turn the power off
Laser llnk turns off automaticall'y_
If you use a Sony TV
• You can turn on the TV automatically when you press LASER LINK or In_-. To do so,
set AUTO TV ON to ON in the MENU settings and turn the TV's main switch on, then
do either of the following:
-Point the LASER LINK emitter at the TV's remote sensor and press LASER LINK.
- Turn on LASER LINK and press _.
• You can switch the video input of the TV automatically to the one which the AV
cordless IR receiver is connected. To do so, set AUTO TV ON to ON and TV _ to
the same video input (1, 2, 3) in the MENU settings. With some models, however, the
pichJxe and sound may be disconnected momentarily when the video input is
switched.
• The above feature may not work on some'IV models.
Note
When laser link is activated (the LASER LINK button is lit), your camcorder consumes
power. Press LASER LINK to turn off the laser llnk function when it is not needed.
1