User Manual

Using the Menu

Color

white t yellow t violet t red t cyan t green t blue

Position

You can select from 8 to 9 choices.

Size

small y large

(You can only select the small size when you are entering more than 13

characters.)

4 Touch .

5 Touch [SAVE].

During playback, playback pause, or recording

[TITLE SAVE] is displayed on the screen for about 5 seconds and the title is

set.

During recording standby

[TITLE] appears. When you press START/STOP to start recording, [TITLE

SAVE] is displayed on the screen for about 5 seconds, and the title is set.

b Notes

• The point you superimposed the title may be detected as an index signal when searching a

recording with other video device.

• When you are using your camcorder on the battery pack and do not operate it for 5 minutes,

the power automatically goes off as the default setting. If you may take 5 minutes or longer

to enter characters, set [A.SHUT OFF] on the (STANDARD SET) menu to

[NEVER] (p. 81). The power will not be turned off. Even though the power goes off, the

characters you have entered remain stored in memory. Turn the power back on, then start

again from step 1 to continue superimposing the title.

Tip

• To change a created title, select the title in step 1, then touch . Then, reselect the

characters again.

TITL ERASE

1 Select the title that you want to delete using / , then touch .

2 Confirm the title is the one you want to erase, then touch [YES].

To cancel the operation, touch [NO].

3 Touch .

TITLE DISP

You can view the title when you playback the picture.

GON Select to display the title when a scene superimposed with a title

appears.

OFF Select when you do not want to display the title.

,continued