user manual

35
GB
Table of
Contents
Let’s Use Enjoying More Troubleshooting Index
Using the auto power on/off timer
You can use the timer function to turn the photo frame on or off automatically.
1 Press MENU.
2 Press B/b to select the (Settings) tab.
3 Press v/V to select [Auto Power ON/OFF]
then press
(enter).
4 Select [Setup Method] then press (enter). Select an item and press
(enter).
[Advanced]: You can set the auto power on/off function in one-hour units
independently for each day of the week.
[Simple]: You can set the auto power on/off function in one minute increments.
[Auto off]: You can set the auto power off time as a specified time that has elapsed with
no operation after the photo frame is turned on. You can specify two or four hours as an
elapsed time.
5 Select [Time Setting] then press (enter).
Set the time for the selected Setup Method as mentioned in “Setting the time” (page 36).
6 Press MENU.