3-285-375-11 (1) Before you begin Digital Photo Printer Preparations Direct printing DPP-FP65/FP75 Printing from a PictBridge camera Printing from a Bluetoothcompliant device Printing from a PC Error messages Operating Instructions Troubleshooting Before operating this unit, please read “Read This First” and “About the Print Packs” supplied and this manual, “Operating Instructions”, thoroughly and retain them for future reference.
For the Customers in the U.S.A. who purchased the DPP-FP75 user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
On trademarks and copyrights • Cyber-shot, , “Memory Stick”, , “Memory Stick Duo”, , “MagicGate Memory Stick”, “Memory Stick PRO”, , “Memory Stick PRO Duo”, , “Memory Stick PRO-HG Duo”, , “Memory Stick Micro”, , , “Memory Stick-ROM”, , “MagicGate”, and are trademarks of Sony Corporation. • Microsoft, Windows, Windows Vista and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Table of Contents Notice for users .............................4 Before you begin Identifying the parts ........................7 Preparations Checking the contents of the package ..........................................9 Setting the ink ribbon .....................9 Inserting the print paper ...............10 Connecting to the AC power source ................................12 Direct printing LCD screen display .......................13 An image preview ...........................13 Image list ......
Printing from a Bluetoothcompliant device Printing from a Bluetooth-compliant device ...........................................32 Compatible profiles for Bluetooth communication .............................. 32 Printing procedures ....................... 32 Printing from a PC Printing from a PC ........................34 Installing the software ..................34 System requirements ..................... 34 Installing the printer driver ............. 35 Uninstalling the printer driver ........
Before you begin Identifying the parts A 1 (on/standby) button/(standby) indicator B CANCEL/ (Index View) button C MENU button D LCD screen 2.4 type DPP-FP65 3.5 type DPP-FP75 E ENTER button F Direction (g/G/f/F) buttons G (Red-eye Correction) button (.page 20) H PRINT button/indicator I Paper tray compartment (.page 10) J Paper tray compartment door K “Memory Stick PRO” (Standard/ Duo) slot (.pages16, 61) L xD-Picture Card slot (.pages16, 62) M SD Memory Card slot (.
Printer left side panel E USB connector (.page 36) When using your computer, connect it via a USB cable to this connector. F PictBridge/EXT INTERFACE connector (.pages 31 to 32) When using a PictBridge-compliant digital camera, a USB memory, a Bluetooth USB adaptor (DPPA-BT1*), or other external USB device, connect it to this connector. (*In some regions, the DPPA-BT1 Bluetooth USB adaptor is not sold.) Printer rear panel A Handle As illustrated below, raise the handle when you carry the printer.
Preparations Checking the contents of the package *1 The plug shape and specifications of the AC power cord differ depending on the region in which you purchased the printer. About Sony Print Packs (not supplied) 1 2 Pull and open the ink ribbon compartment door. Insert the ink ribbon in the direction of the arrow until it clicks into place. Preparations Make sure that the following accessories are supplied with your printer.
Notes • Do not touch the ink ribbon or store the ink ribbon in a dusty location. Fingerprints or dust on the ink ribbon may result in imperfect printing. • Do not rewind the ink ribbon and use the rewound ink ribbon for printing. Otherwise, proper printing results will not be obtained, or a malfunction may occur. If the ink ribbon does not click into place, remove it and then re-insert it.
3 Close the paper tray cover. • To avoid paper jam or malfunctions of the printer, make sure of the following before printing: – Do not write or type on the print paper. – Do not attach a sticker or stamps on the print paper. – When adding print paper to the paper tray, be sure that the total number of print paper sheets does not exceed 20 sheets. 4 – Do not insert different types of print paper together into the paper tray. Open the slide cover. – Use the print paper for this printer only.
Connecting to the AC power source 1 2 Insert the plug of the AC adaptor into the DC IN 24 V jack on the back of the printer. 10 cm (13/32 inches) Connect one plug of the AC power cord to the connector of the AC adaptor and the other plug to the wall outlet. Notes • Do not place the printer in an unstable location such as on a wobbly table. • Leave enough room around the printer. The print paper emerges from the back a few times during printing.
Direct printing LCD screen display An image preview On-screen Display: On You can change the image preview view by setting the “On-screen Display” from the menu. (page 27) A Access indication Appears while the printer is accessing a memory card or a USB memory. Note While the access indication is displayed, do not remove a memory card or a USB memory, or do not turn off the power. Data may be damaged. B Input/setting indications Input indications and settings information for an image are displayed.
Image list Displays a list of the images stored in the selected media. DPP-FP65 DPP-FP75 D DPOF print preset indication Switching an image preview and image list You can switch the display as follows: • To display the image list In an image preview, press the (Index View) button. When there are multiple pages, you can switch pages by pressing f/F. • To display an image preview In the image list, press g/G/f/F to move the cursor to the desired image and press ENTER.
List of icons The following are the icons displayed on the LCD screen. You can proceed with operations by selecting a desired icon with g/G/f/F, and then pressing ENTER. For detailed explanations, see the pages in the parentheses. Icons Meaning Edit (21) Layout Print (23) Icons Meaning Batch Print Index Print (25) (Prints all the images in split screens.) Print All (25) (Prints one copy each for all the images.
Basic printing Inserting a memory card Prepare a memory card that contains images for printing: “Memory Stick”, “Memory Stick Duo”, SD Memory Card, or an xD-Picture Card. Insert the desired card with its labelled surface facing up into the proper slot until it clicks firmly into place. For the types of memory cards you can use with the printer, please see pages 61 to 63. Notes • Insert only the memory card that you want to use for printing.
4 Press PRINT. While the PRINT button is lit in green, the printer is ready for printing. The image being displayed is printed. To print multiple images Repeat steps 2 and 3. To change the print quantity Display the image whose print quantity you want to change, and change the print quantity with f/F. If you select “0”, printing is canceled. Enlarging an image to be printed (Trimming Print) On selecting input The printer is not equipped with an input select switch.
Enjoying various printing z Operation using the printer buttons Red-eye Correction MENU Red-eye Correction .page 20 Press the (Red-eye Correction) button to correct the red-eye phenomenon of an image automatically. A variety of printing Press MENU and then select an icon of the desired operation. • Press g/G/f/F to select the desired icon and press ENTER. 1 Edit 2 Layout Print 3 ID Photo Print 4 Batch Print 5 Print setup • To exit the menu, press MENU again.
1 Edit .page 21 You can adjust the size, position, hue or other picture property of the selected image. For the icons you can use, see page 15. 2 Layout Print .page 23 You can place multiple photos on split screens to make a print 3 ID Photo Print .page 24 You can specify the desired width and height of a photo. You can use a photo for an identification card such as a passport. 4 Batch Print .page 25 You can print a large number of images of a memory card or USB memory at one time.
Red-eye Correction 1 Tips • If there are no images with print quantity settings, the Red-eye Correction adjusts the image being previewed. Display an image that you want to adjust and then press (Redeye Correction). • If there are other images with print quantity setting, and print quantity is not specified for the image being previewed, the image being previewed will not be corrected. The images with print quantity settings will be adjusted. Red-eye Correction of the selected image starts.
Editing an image Enlarging and reducing an image size 1 From the Edit menu (page 19), press g/G to select (Enlarge) to enlarge an image or (Reduce) to reduce it, and then press ENTER. 1 Each time you press ENTER, the image rotates 90° clockwise. 2 1 Icons Brightness Moving an image Tint From the Edit menu (page 19), press g/G to select (Move) and then press ENTER. The g/G/f/F indicators appear on the Saturation Sharpness left/right/above/below the image and you can move the image.
When (Brightness) is selected Printing an edited image 1 Press g/G to select (Print) and then press ENTER. Or, press PRINT. The print window is displayed. The print quantity is displayed. 2 Set the print quantity. • To increase the print quantity one by one, press f repeatedly. • To reduce the print quantity one by one, press F briefly repeatedly. Slider Press g/G to adjust an image while checking the level of brightness, for example. • Brightness: Press G to brighten the picture or g to darken it.
Making layout prints 1 From the main menu (page 18), press g/G/f/F to select (Layout Print), then press ENTER. The Layout Print templates are displayed. 2 Press g/G/f/F to select the desired template, then press ENTER. The preview of the selected template is displayed Exiting the menu Press g/G to select then press ENTER. When you select a template with multiple images, repeat the procedures below to select an image for each area. 1 Press g/G/f/F to select an image area, then press ENTER.
Making an ID photo 1 From the main menu (page 18), press g/G/f/F to select (ID Photo) and then press ENTER. 5 Press f/F to select ENTER. and press The window used for selecting an image is displayed. 6 Press g/G/f/F to select the desired image, and then press ENTER. The window used for adjusting the image position is displayed. For adjustment, see step “Adjusting an image” on page 21. You can also change a color photo into a monochrome one. Select (Monochrome) and press ENTER.
Making Batch Print 1 (Index Print/DPOF Print/Print All) From the main menu (page 18), press g/G/f/F to select (Batch Print) and then press ENTER. The Batch Print menu is displayed. • Index Print You can print a list (index) of all the images stored in a memory card or a USB memory, which allows you to check the contents of the selected media easily. The number of split panes on a sheet is fixed to 8 horizontally by 6 vertically.
Changing the settings Setting the Date Print When the image is recorded using the DCF (Design rule for Camera File system) format, you can print an image with the date of shooting that is recorded as part of shooting information. You can select “ON” or “OFF” of Date Print and the order of year/month/day. 1 From the (Print setup) menu, press g/G/f/F to select (Date Print) and then press ENTER. The Print setup menu is displayed. 2 3 Press g/G to select (Date Print) or (no Date Print) , and press ENTER.
2 Press g/G to select the desired print finish. Items Setting the On-screen Display Procedures Borderless: Prints an image without blank space around the image. 1 From the (Print setup) menu, press g/G/f/F to select (Onscreen Display) and then press ENTER. The On-screen Display menu is displayed. Borders (Pattern 1): Prints an image with borders around the image, without cutting the image.
3 Press ENTER. The setting is fixed. The Print setup window is displayed again. To redo the operations Press CANCEL. The Print setup window is displayed again. Changing the Color Setting 1 From the (Print setup) menu, press g/G/f/F to select (Color Setting) and then press ENTER. The Color Setting menu is displayed. Tip The year, month and day of the shot date are displayed in the same order as the Date Print setting. 2 Press g/G to select the desired color element, and press f/F to set the level.
3 Press ENTER. The setting is fixed. The Print setup window is displayed again. To redo the operations Press CANCEL. The Print setup window is displayed again. Resetting to the Default Setting You can reset all the settings to the default settings. 1 Hiding or showing the Printer information display 1 The confirmation window is displayed. 2 Press f/F to select “OK” and press ENTER. The printer settings are reset to their default settings. Press ENTER.
Printing from a USB memory You can connect a USB memory and the printer, and print an image directly from the USB memory. Notes • We cannot guarantee connection with all types of USB memory. • We cannot guarantee connection with a mass storage-compliant digital camera or photo storage. • If a memory card is inserted in the printer, the printer cannot read the signal from a USB memory connected to the PictBridge/EXT INTERFACE connector of the printer. Remove the memory card, if any.
Printing from a PictBridge camera Printing from a PictBridge camera To PictBridge/EXT INTERFACE connector You can connect a PictBridge-compliant digital camera and print an image directly from your digital camera. When printing in the PictBridge mode, make sure to remove memory card(s) and your computer from the printer in advance. 1 3 4 Connect the printer to the AC power source (page 12). Press the 1 (on/standby) button to turn on the printer.
Printing from a Bluetooth-compliant device Printing from a Bluetoothcompliant device By connecting the Sony DPPA-BT1 Bluetooth USB adaptor to the PictBridge/EXT INTERFACE connector of your printer, you can print an image from a Bluetooth-compliant mobile phone, digital camera, or other device. Maximum number of pixels that can be handled 8 000(H) × 6 000(V) dots (Maximum 3.
– Where a wireless LAN is established or a microwave oven is being used near-by, or other electromagnetic waves are emitted. • Since a Bluetooth device and a wireless LAN (IEEE802.11b/g) device use the same frequency ranges, wave interference may occur when the product is used near a device equipped with a wireless LAN. This may cause deterioration in the communication speed and connection conditions.
Printing from a PC Printing from a PC You can print the images from a PC by installing the supplied software on your PC and connecting it to the printer. This section explains how to install the supplied software on your PC and how to use the supplied Picture Motion Browser software to print an image. Please also refer to the operating instructions supplied with your PC for information on operating the PC.
Notes Installing the printer driver Follow the procedures below to install the driver. Notes • Do not connect the printer to the PC before installing the driver. • Please log on to Windows using a “Computer administrator” user account. • Be sure to close all running programs before installing the software. • The dialog boxes shown in this section are from Windows Vista, unless otherwise specified. The installation procedures and the dialog boxes shown differ depending on the operating system.
3 Click “Next”. The license agreement dialog box is displayed. 4 Read the agreement thoroughly, and if you agree, check “I accept this agreement” and click “Next”. To USB connector Windows PC To USB connector Note 5 Use a B-type USB cable shorter than 3m in length. Click “Install”. Installation starts. 6 7 8 When the “Sony DPP-FP65/75 printer driver has been successfully installed.” dialog is displayed, click “Finish”.
5 Notes • If the installation fails, remove the printer from your PC, restart your PC, and then follow the installation procedures from step 2 again. • After installation, the “Sony DPP-FP65” or “Sony DPP-FP75” is not yet set as the default printer. Set the printer you use for each application. • The supplied CD-ROM will be required when you uninstall or re-install the printer driver. Keep it for possible future use.
Installing the Picture Motion Browser 5 Read the agreement thoroughly, and if you agree, check “I accept the terms of the license agreement” and click “Next”. Follow the procedures below to install the Picture Motion Browser. Notes • Please log on to Windows using a “Computer administrator” user account. • Be sure to close all running programs before installing the software. • The dialog boxes shown in this section are from Windows Vista, unless otherwise specified.
Uninstalling the Picture Motion Browser When this software is no longer needed, remove it from your PC as follows: 1 Click “Start” - “Control Panel”. The Control Panel is displayed. 2 3 Open “Add or Remove Programs”. Select “Sony Picture Utility” and click “Change/Remove”. The software uninstallation process starts. Printing photos from the Picture Motion Browser You can use the Picture Motion Browser to print an image from your PC using P size print paper.
How to access the “Pictures” folder • In Windows 2000: Click “My Documents” - “Pictures” on the desktop. • In Windows Vista/XP: Click “Start” - “Pictures” from the taskbar. 2 Click “Start”. The main window of the Picture Motion Browser is displayed 3 Click the folder containing the photos you want to print. As an example, the “sample” folder is selected in the following explanation. 4 Select the photos that you want to print and click (print). The Print dialog box is displayed.
Items Properties 6 Functions Specifies paper size, orientation, picture quality and other details. 8 Click “Advanced. The “Sony DPP-FP65/75 Advanced Options” dialog box is displayed. To set the paper orientation or other print options, click “Properties”. The “Properties” dialog box of the selected printer is displayed. The printer driver of the printer utilizes the Universal Printer Driver, a Microsoft common printer driver.
Items Functions Document Options • Advanced Printing Features: Select “Enabled” to turn on advanced printing options such as “Page Order”. If a compatibility problem occurs, disable this feature. • Color Printing Mode: To print in colors, select “True Color (24bpp)”. To print in monochrome, select “Monochrome”. Printer Features • Borderless Print: To print an image without borders, select “ON”. To print with borders, select “OFF”.
4 Tips Notes • To select a series of still images in the image area of the main window, click the first image in the series and then click the last image while pressing the Shift key. To select multiple still images not in a sequence, click the images individually while pressing the Ctrl key. • You can also print from an image preview. Registering a browsing folder Click “Close”. • The folder you select as the destination of the imported images will be registered automatically.
Printing from a commerciallyavailable software application You can use a commercially-available software application to print an image from the DPPFP65/FP75. Select “DPP-FP65” or “DPPFP75” as a printer in the print dialog box, and select the print paper size in the page setup dialog box. For details of print settings, see steps 5 and 7 on pages page 40 and 41.
Error messages If an error display appears If an error occurs, the following error display may appear on the LCD screen. Follow the solution described here to solve the problem. Error display Meaning/Solutions c There are no image files on the memory card or a USB memory that the printer can handle. Connect a memory card or device that contains images that can be displayed with the printer. c There are no DPOF-preset image files on the memory card or a USB memory.
Error display Meaning/Solutions c The printer does not support a USB hub or a drive with a built in USB hub. Connect the device directly to the printer or use a device that does not contain a USB hub function. c An incompatible memory card is inserted. Use a memory card or a USB memory that the printer supports. (.pages 61 to 63) c An error may have occurred with a memory card or a USB memory. If these messages appear frequently, check the memory card or a USB memory status with another device.
Error display Meaning/Solutions c The ink ribbon is stuck. Unplug the AC power cord of the printer, connect it again. When the printer motor is stopped, remove the ink ribbon and insert a new ink ribbon. If you cannot remove the ink ribbon, consult with your Sony dealer or Sony service facilities. c No print paper or cleaning sheet is set in the paper tray. Set the print paper of the displayed size as follows in the paper tray, insert the paper tray into the printer, and then press PRINT. (.
Troubleshooting If trouble occurs If you run into any problems using the printer, use the following guidance to solve the problem. If the problem persists, consult your Sony dealer. Power Symptom Check The printer cannot • Is the AC power cord be turned on properly connected? Cause/Solutions c Connect the AC power cord to an AC outlet securely. (.page 12) Displaying images Symptom Check The LCD screen displays no images.
Symptom Check Some images in • There are 7 or more the image list are hierarchies on the memory not displayed or card or a USB memory. not printed even if they are displayed. The file name is not displayed correctly. Cause/Solutions c The printer cannot display images saved in a folder of the 7th or higher hierarchy.
Printing Symptom Check Cause/Solutions Paper does not feed. • Is the print paper properly set in the paper tray? c If print paper is not properly loaded, the printer may develop trouble. (.page 9, 10) Check the following: • Insert the correct set of print paper and ink ribbon. • Load the print paper in the correct direction in the tray. • You can insert a maximum of 20 sheets of print paper into the tray. If the sheets exceed 20, remove the extra sheets.
Printed results Symptom Check The printed pictures are inferior in quality. • Did you print preview image c Depending on the type of digital camera data? used, preview images may be displayed along with the primary images in the thumbnail list. The printed quality of the preview images will not be as good as the primary images. Note that if you delete the preview images, the data for the primary images may be damaged.
Symptom The picture quality and colors of the image previewed on the screen differs from those printed. The printed image differs when an image is printed directly from the memory card inserted into the printer’s slot and when it is printed via a PC. Check Cause/Solutions — c Because of differences in the display method or profiles of an LCD screen, please regard the image being displayed on the display as just a reference.
Symptom Check Even if “Borderless” is selected, the image is printed with borders on both sides. Cause/Solutions — c When you use an editing/recording device other than the printer to edit or save an image, the image is saved with blank areas around the image. Even if you print it with the “Borderless” setting, you cannot eliminate the borders on both sides of a print. • Did you select “Borders (Pattern 1)”? c You can print the whole area of an image by selecting “Borders (Pattern 1)”. (.
Others Symptom Check Cause/Solutions You cannot insert the ink ribbon smoothly. — The ink ribbon cannot be removed. 54 GB — c If the ink ribbon does not click into place, remove it and then re-insert it. Only when the ink ribbon is too slack to be loaded, wind the ink ribbon in the direction of the arrow to remove the slack. (.page 9) c Turn off the printer using the 1 (on/ standby) button and then turn it on again. After the motor sound stops, try to remove the ink ribbon.
Connecting with a digital camera or other external device Symptom Check Cause/Solutions The PictBridge • Is the digital camera c Connect the cable correctly. mark does not connected correctly? appear on the LCD • Is the 1 (on/standby) button c Turn on the 1 (on/standby) button. screen of the turned on? digital camera. • Does your digital camera c See the manual supplied with your support PictBridge? camera, or consult with the manufacturer.
Connecting with a computer Symptom The images on the memory card or a USB memory inserted in the printer are not displayed on the PC. You lost the supplied CD-ROM and want to obtain a new one. The printer driver cannot be installed. Check Cause/Solutions c The printer does not provide a function for viewing the memory card or a USB memory images from the printer.
Symptom Check Cause/Solutions The printer does not respond to the printing order from the PC. — An image is printed with borders even if I select “Borderless”. The print quantity specified in “Pages Per Sheet” on the “Layout” tab of the “Sony DPPFP65/FP75 Properties” dialog box does not match the actual print quantity and printed results. c When using an application other than the Picture Motion Browser, an image might be printed with Borders even if you select Borderless Print.
If paper jams 1 Turn off the power of the printer and then turn it on again. Please wait for the print paper to be ejected automatically. 1 (on/standby) Print paper 2 3 Remove the ejected print paper from the printer. Remove the paper tray and ink ribbon from the printer and check to ensure if there is no jammed print paper inside. Check to see if there is jammed paper. If there is, remove it. Note If you cannot remove the jammed paper, contact your Sony dealer.
Cleaning If white lines or period-like dots are printed on the pictures, use the cleaning cartridge and cleaning sheet supplied to clean inside the printer. Before you start cleaning the printer, please remove any memory cards, USB memories, or USB cables from the printer. 1 2 3 4 5 Set the paper tray into the printer and press PRINT. The cleaning cartridge and cleaning sheet will clean inside the printer. After the cleaning is finished, the cleaning sheet is automatically ejected.
Additional information Precautions On safety • Be careful not to set or drop any heavy objects on the power cord, or to damage the power cord in any way. Never operate this printer with a damaged power cord. • Should any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further. • Never disassemble the printer. • To disconnect the power cord, pull it out by the plug. Never pull the power cord itself.
On restrictions on duplication When duplicating documents with the printer, pay special attention to the following: • Duplication of banknotes, coins, or securities is against the law. • Duplication of blank certificates, licenses, passports, private securities, or unused postal stamps is also against the law. • TV programs, films, video tapes, portraits of other people or other materials may be copyrighted. Unauthorized video printing of such materials may infringe the provisions of the copyright law.
Notes on use • For the latest information on the “Memory Stick” types that the printer supports, see the “Memory Stick” compatibility information on the Sony web site: http://www.memorystick.com/en/support/ support.html (Select the area where you use your printer, and then select “Digital Printer” from each area page.) • Do not insert more than one “Memory Stick” at the same time, which may cause trouble with the printer.
Notes on using a memory card • The printer cannot write, delete, or format on a memory card. • When using a card, make sure to check the correct insertion direction of the card and the correct insertion slot. • Do not remove a card or turn off the printer while the printer is reading or accessing data, or the access indicator is flashing. Otherwise, data may be rendered unreadable or erased. • We recommend that you save a backup of important data.
Image file name DCF format, 8.3 format, less than 6th or higher hierarchy Maximum number of files that can be handled 999 files for a memory card/a USB memory Ink ribbon/Print Paper See the supplied “About the Print Packs”. LCD screen LCD panel: DPP-FP65: 6.0 cm (2.4 type) TFT drive DPP-FP75: 8.8 cm (3.
*6 : The time for data processing and transferring is excluded. *7 : Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format *8 : You cannot print using the Picture Motion Browser. Customer support home page The latest support information is available at the following home page address: http://www.sony.net/ Printing range P size 152.4 mm/6 inches (1 800 dots) 95.5 mm/ 3 7/8 inches (1 128 dots) 101.6 mm/ 4 inches (1 200 dots) 146.
Glossary DCF (Design rule for Camera File system) This printer conforms to the DCF (Design rule for Camera File system) standard established by JEITA (Japan Electronics and Information Technology Industries Association) to maintain file exchangeability and compatibility between digital cameras and related products. Complete exchangeability and compatibility, however, are not guaranteed.
Index A AC power source 12 Adjusting an image 21 B Batch Print 25 Bluetooth device 32 Borders/Borderless print 26, 42 Brightness 22 C Cleaning 59 Color settings 28 Connecting AC power source 12 Bluetooth device 32 Digital camera 31, 32 External device 31, 32 PC 36 D Date Print 26 DC IN 24 V 12 DPOF 13, 25 E F Front panel 7 H Handle 8 Icons 15 ID photo 24 Image data display 13 Image preview 13 Index Print 25 Index View 14 Input indications 13 Inserting a memory card 16 Inserting an ink ribbon 9 Insert
Stopping printing 43 Supplied accessories 9 Switching the screen display 14 System requirement 34 T Tint 22 Trimming Print 17 Troubleshooting 48 U Uninstalling Picture Motion Browser 39 Printer driver 37 USB memory 30 V Various printing 18 X xD-Picture Card Notes on use 62 Types 62 Z Zooming in/out 14, 21 68 GB
Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink.