Help Guide Digital Paper System DPT-RP1 Refer to this manual whenever you are having problems or are uncertain while using the Digital Paper. The screens and illustrations that appear in this Help Guide may differ from the actual product. Changes may be made without prior notice, to improve the design and specifications.
Digital Paper App (dedicated app) screen Transferring/managing documents Connecting to a computer Connecting via Wi-Fi/Connecting using a USB cable Connecting via Bluetooth Transferring documents to the Digital Paper Transferring a document from a computer Using the print operation to transfer and display data on the Digital Paper Transferring documents from the Digital Paper Transferring a document to a computer Creating a back up Syncing the Digital Paper with a computer Searching with the Digital Pap
Displaying documents side-by-side Rotating documents Searching with the Digital Paper Searching for a string of text within a document Searching for a handwritten mark within a document Searching using document information and other information Searching for documents that contain a specific mark Viewing a sticky note attached by a previous Digital Paper model Displaying a document on the computer Writing Handwriting on a document Adding a highlight Using the eraser Copying/cutting and moving handwritten
Updating the software Setting up the Digital Paper App Troubleshooting Digital Paper issues Cannot turn on the power Cannot charge the Digital Paper The battery seems to drain quickly It takes time for a screen to be displayed The screen is not appearing The touch panel is reacting slowly Pen does not work The position of the pen tip is not aligned with the actual writing Network issues Cannot set up/connect to a network The network connection suddenly stopped working Regarding documents Cannot display a
Table Of Contents DPT-RP1 Help Guide......................................................................................................................i Getting Started.................................................................................................................................i Turning the power on/off.................................................................................................................1 About the battery......................................................
Displaying left and right pages in a two-page spread...................................................................40 Displaying documents side-by-side..............................................................................................41 Rotating documents......................................................................................................................43 Searching with the Digital Paper.........................................................................................
Pen does not work..................................................................................................................80 The position of the pen tip is not aligned with the actual writing.............................................81 Network issues...............................................................................................................................iv Cannot set up/connect to a network......................................................................................
Help Guide Digital Paper System DPT-RP1 Turning the power on/off To turn the power on Press the (power) button (a). The charge indicator (b) will blink in orange until startup is complete, at which point the charge indicator turns off. The charge indicator lights up in red while charging and turns off when charging is complete. Hint When you turn on the power for the first time, instructions for initial setup are displayed. Refer to the supplied “Quick Start Guide” when performing initial setup.
To cancel sleep mode, press the (power) button. Note [DIGITAL PAPER] is displayed in the middle of the screen during Sleep mode. Hint The Digital Paper is set to automatically enter sleep mode when it is not operated for 60 minutes, if it has been paired with the Digital Paper App. Launch the Digital Paper App on the computer, then click [Settings] — [General Settings] — [Edit], and select a time for [Auto sleep ].
Help Guide Digital Paper System DPT-RP1 About the battery When you press the (home) button, the battery icon (a) appears in the top right corner of the home menu, allowing you to check the remaining battery power and the charging status of your Digital Paper.
The remaining battery power and charging status of the pen cannot be viewed on the home menu. When the battery becomes low, a message will appear on the Digital Paper if you move the pen close to it. Please charge the pen before the battery is completely drained.
Help Guide Digital Paper System DPT-RP1 Setting the screen lock For security purposes, the Digital Paper can be protected by a screen lock. When the screen lock is set, a lock password must be entered after the Digital Paper is turned on or awaken from sleep mode. 1 Press the (home) button, and tap [Settings]. 2 Tap [Screen Lock] — [Screen Lock] — [Enable] — [OK]. 3 Enter a lock password, and tap [OK]. The lock password can be any combination of 4 to 20 alphanumeric characters and symbols.
Help Guide Digital Paper System DPT-RP1 Disabling the screen lock via FeliCa card/FeliCa-compatible device To waken the Digital Paper from sleep mode, instead of entering a lock password, a FeliCa card, FeliCa-compatible mobile phone, smartphone, or similar item can be held against the Digital Paper to disable the screen lock. After setting a lock password, follow the steps below to register a FeliCa card/FeliCa-compatible device to the Digital Paper. 1 Press the (home) button, and tap [Settings].
To disable the the screen lock When the entry screen for the lock password is displayed, align the center of the FeliCa card or (N mark) on the Digital Paper for about two seconds. compatible device with (FeliCa mark) on the FeliCa- To delete the registered information for a FeliCa card/FeliCa-compatible device Press the (home) button, and tap [Settings] — [Screen Lock] — [NFC Card Lock Release Settings]. Enter the lock password, and tap [OK] then [Deregister NFC Card].
Help Guide Digital Paper System DPT-RP1 Home menu The home menu is displayed when you press the (home) button. 1. Function icons 2. NFC function status (On/Off) 3. Connection status when the Bluetooth function is on : Bluetooth connected : Bluetooth not connected Wi-Fi network signal status 4. : Wi-Fi network connected (number of bars indicates signal strength) : Wi-Fi network inaccessible : Wi-Fi function off Remaining battery/charge indicator 5.
Help Guide Digital Paper System DPT-RP1 Document screen Tap anywhere on the screen of an open document to display the tool bar. 1. 2. 3. 4. 5. 6. 7. (quick access list) Select and display a document from Recently Read or another document from the current folder. Page position indicator Tap along the line to change page. (Paste) Paste the handwriting that you selected with Copy/Cut. This icon does not appear if Copy/Cut has not been selected.
8. Filename To hide the tool bar Tap an area outside of the tool bar.
Help Guide Digital Paper System DPT-RP1 Digital Paper App (dedicated app) screen The Digital Paper App must be used to operate the Digital Paper with your computer. After connecting the computer to the Digital Paper, launch the Digital Paper App on your computer. 1. Menu 2. 3. 4. 5. 6. 7. 8. 9. 10 . Operate the Digital Paper App from the menu. Connection status with the Digital Paper and empty space/total available space Execute sync. Will not operate if the sync folder is not set.
You can confirm whether a file is a document, note, etc. based on the icon. : Document : Document to sync : Note : Note to sync : Unread document/note : Folder : Folder to sync Right-click on an item to display a menu of available operations based on the situation. When you double-click on a folder name, the display switches to that folder. * Folders are only displayed when the Digital Paper App is in Folder view.
Help Guide Digital Paper System DPT-RP1 Connecting via Wi-Fi/Connecting using a USB cable After the Digital Paper has been paired with the Digital Paper App, documents can be transferred and otherwise operated, by connecting the Digital Paper to the computer. For how to pair with the Digital Paper App, see the links in “Related Topics.” There are three ways to connect to a computer: “connect via Wi-Fi,” “connect via the supplied USB cable,” and “connect via Bluetooth® .
To check the connection status Launch the Digital Paper App on the computer. If [Connected] is displayed in the upper left portion of the screen, the Digital Paper and the computer are properly connected. Hint When removing the USB cable, close the Digital Paper App before doing so.
Help Guide Digital Paper System DPT-RP1 Connecting via Bluetooth To make a Bluetooth connection with your computer, you must first complete Bluetooth pairing (device registration). Once pairing is complete, you can operate the Digital Paper from your computer the next time you use the Digital Paper if the Bluetooth function of the Digital Paper is turned on. (When the Digital Paper App is launched, Windows can automatically connect to the Bluetooth-paired Digital Paper.) Perform the steps below to pair.
For Mac It is unavailable to connect via Bluetooth automatically. Connect via Bluetooth using the Mac OS function. For details, refer to the operating instructions of the Mac. Notes on Bluetooth auto connection (Windows) If the Digital Paper is automatically connected to the computer via Bluetooth when the computer and other devices are connected via Bluetooth as an access point, the other devices are disconnected from the computer.
Help Guide Digital Paper System DPT-RP1 Transferring a document from a computer Use the Digital Paper App to transfer documents. Only PDF files can be transferred to the Digital Paper. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Click [Folders] and open a folder on your Digital Paper (transfer destination). 4 Select a file/folder on your computer, then drag-and-drop it into the Digital Paper App.
Transferring a document to a computer Syncing the Digital Paper with a computer Changing the organization of documents/folders on the Digital Paper Using the print operation to transfer and display data on the Digital Paper 4-597-942-11(2) Copyright 2016 Sony Corporation 18
Help Guide Digital Paper System DPT-RP1 Using the print operation to transfer and display data on the Digital Paper Use the print operation to transfer open files or web pages from your computer to the Digital Paper. Files and web pages that are not in PDF format will be converted into PDF files when transferred. Note This function is only available on computers that use the following operating systems (OS): Microsoft Windows 10, macOS 10.12 (Sierra), Mac OS X 10.11 (El Capitan), and Mac OS X 10.
Connecting via Wi-Fi/Connecting using a USB cable Connecting via Bluetooth Transferring a document from a computer Syncing the Digital Paper with a computer Changing the organization of documents/folders on the Digital Paper 4-597-942-11(2) Copyright 2016 Sony Corporation 20
Help Guide Digital Paper System DPT-RP1 Transferring a document to a computer Use the Digital Paper App to transfer documents. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Select a file/folder on the Digital Paper via the Digital Paper App. Multiple files/folders can be selected and transferred together. 4 (Transfer documents to computer), and select a folder on your computer (transfer Click destination).
Help Guide Digital Paper System DPT-RP1 Creating a back up In preparation for the unlikely event that the data on your Digital Paper is accidentally erased or that a malfunction causes the data to be deleted or corrupted, be sure to back up all important content to your computer. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Click [Folders], and open the folder labeled [System storage] at the top of the Digital Paper.
Help Guide Digital Paper System DPT-RP1 Syncing the Digital Paper with a computer Using the Digital Paper App, you can sync PDF files within in a specific folder on your computer (a) with those within a specific folder on the Digital Paper (b). Content that is added, changed, or deleted is done so on your computer and the Digital Paper. 1 Connect the computer and the Digital Paper. 2 Launch the Digital Paper App on the computer.
On the folder selection screen, select the folders of the computer. 4 When the sync settings are successful, the corresponding folder/document/note icon changes. Click 5 (Sync). The specified folder is synced with the Digital Paper. To update the contents of the synced folder Click (Sync). To delete the sync settings On the Digital Paper App, right-click the folder configured with the sync settings and click [Delete sync setting].
Help Guide Digital Paper System DPT-RP1 Searching for a document or folder (Digital Paper App) Using the Digital Paper App, the folder names/file names within the Digital Paper can be searched, as well as the title/author listed in the document settings. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Set the search parameters. When you want to search all of the documents, click [All documents].
Help Guide Digital Paper System DPT-RP1 Searching for documents that contain a specific written mark (Digital Paper App) Select a mark using the Digital Paper App to search for documents on the Digital Paper which contain the mark. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Set the search parameters. When you want to search all of the documents, click [All documents].
Related Topic Connecting via Wi-Fi/Connecting using a USB cable Connecting via Bluetooth Searching for a document or folder (Digital Paper App) Searching for a handwritten mark within a document Searching for a string of text within a document 4-597-942-11(2) Copyright 2016 Sony Corporation 27
Help Guide Digital Paper System DPT-RP1 Changing the organization of documents/folders on the Digital Paper Using the Digital Paper App, you can create new folders on the Digital Paper, as well as rename, move, copy, and delete the existing folders/documents. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Click [Folders] or [All documents] to display the folder/document you want to edit.
[Transfer documents to Digital Paper] function. When renaming or moving the synced folder, the sync settings are deleted. If you want to sync continuously, set [Set sync folder] again.
Help Guide Digital Paper System DPT-RP1 Adding/editing a note template Using the Digital Paper App, you can add a note template to the Digital Paper. You can also delete templates and change their names. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Click [Settings] to display the [Settings] screen. To add a note template Click [Add] under [Note template].
Related Topic Selecting defaults for the note template 4-597-942-11(2) Copyright 2016 Sony Corporation 31
Help Guide Digital Paper System DPT-RP1 Opening a document You can organize the All Documents list by [Date Read] or [Date Modified] and select a document from there. 1 Press the (home) button, and tap [All Documents]. 2 Tap [Date Read] or [Date Modified]. is displayed to the left of documents, and is displayed. For unread files, 3 is displayed to the left of notes. Tap the document you want to open.
Help Guide Digital Paper System DPT-RP1 Selecting and opening from a folder 1 Press the (home) button, and tap [Folders]. 2 Tap to open a folder, and then tap the document you want to display. To return to a higher tier of folders, tap the name of the folder at the top of the screen. is displayed to the left of documents, and is displayed to the left of notes. is displayed.
Help Guide Digital Paper System DPT-RP1 Opening a different document from the quick access list Select and display other documents from the list of the recently read documents or documents belonging to the same folder as the document that is currently being displayed on the Digital Paper. 1 Tap anywhere on the screen of a document to display the tool bar.
Related Topic Opening a document Selecting and opening from a folder 4-597-942-11(2) Copyright 2016 Sony Corporation 35
Help Guide Digital Paper System DPT-RP1 Turning the page Swipe (move your finger) in the direction of the next page. When [Page Flow] is set to [Right to left], swipe right to left, and when [Page Flow] is set to [Left to right], swipe left to right. For a PDF file for which this setting was not designated on a computer, turn to the next page by swiping right to let by default.
Help Guide Digital Paper System DPT-RP1 Changing how to turn pages 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap 3 To turn the page by swiping from right to left, tap [Right to left], and to turn by swiping from left to right, tap [Left to right]. (option) in the upper right of the document screen — [Page Flow].
Help Guide Digital Paper System DPT-RP1 Zooming in on a document Zoom in on part of a document. While zoomed in, you can write using the pen, delete items written with the pen, and highlight items. 1 Tap anywhere on the screen of a document to display the toolbar. 2 Tap 3 Tap the location you want to zoom into, or use your finger or the pen to encircle the area you want to zoom into. (zoom in) in the upper right of the document screen. The document is zoomed in.
Help Guide Digital Paper System DPT-RP1 Display page thumbnails You can search for a page by displaying a list of 16 pages on a single screen. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap (option) in the upper right of the document screen — [Page Thumbnails]. To return the display to normal size Tap any one of the pages. Hint When switching from documents that are being displayed side-by-side, nine pages are displayed in the list.
Help Guide Digital Paper System DPT-RP1 Displaying left and right pages in a two-page spread Display the pages of a single document two at a time, as a left-right two-page spread. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap (option) in the upper right of the document screen — [Two-Page Spread]. To change the page settings Depending on whether the document has a cover page, you can change whether to start the two-page spread from page one.
Help Guide Digital Paper System DPT-RP1 Displaying documents side-by-side Display the same document twice in a side-by-side arrangement. You can also display two different documents or notes in a sideby-side arrangement. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap (option) in the upper right of the document screen — [Display Documents Side-by-Side].
Related Topic Displaying left and right pages in a two-page spread Creating a side-note on an open document 4-597-942-11(2) Copyright 2016 Sony Corporation 42
Help Guide Digital Paper System DPT-RP1 Rotating documents Rotate a document 90 degrees. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap (option) in the upper right of the document screen — [Rotate]. To return the document to its original orientation Once again, tap (option) — [Rotate]. Note When documents are displayed side-by-side or when a document is being displayed as a two-page spread, the document cannot be rotated.
Help Guide Digital Paper System DPT-RP1 Searching for a string of text within a document Search for a string of text within the document that is currently being displayed on the Digital Paper. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap 3 Tap the [Search Text] tab — the search term input field. Then use the keyboard to enter a string of text, and tap [Search]. 4 Tap one of the search results. (search) in the upper right of the document screen.
Help Guide Digital Paper System DPT-RP1 Searching for a handwritten mark within a document Select a specific mark, and search for the handwritten mark within the document that is currently being displayed on the Digital Paper. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap 3 Tap the [Search Mark] tab, and then select the mark and tap [Search]. (search) in the upper right of the document screen.
Help Guide Digital Paper System DPT-RP1 Searching using document information and other information You can search for file names, titles, or authors of a document on the Digital Paper. 1 Press the (home) button and tap [All Documents]. 2 Tap 3 Tap the [File Information] tab, insert a string of text, and tap [Search]. (search) in the upper right of the document screen. The search results are displayed. 4 Tap a search result. The document opens.
Help Guide Digital Paper System DPT-RP1 Searching for documents that contain a specific mark Search for documents on the Digital Paper that contain a handwritten mark by selecting the specific mark. 1 Press the (home) button and tap [All Documents]. 2 Tap 3 Tap the [Mark] tab, select the mark you want to search, and tap [Search]. (search) in the upper right of the document screen. The documents containing the mark are displayed.
Help Guide Digital Paper System DPT-RP1 Viewing a sticky note attached by a previous Digital Paper model The contents of handwritten sticky notes and text sticky notes that were added to a document using the previous Digital Paper model, “DPT-S1,” can be viewed. 1 Tap (handwritten sticky note) or (text sticky note) on the document with your finger. To close the handwritten sticky note/text sticky note screen Tap an area outside of the sticky note.
Help Guide Digital Paper System DPT-RP1 Displaying a document on the computer Documents that are saved to the Digital Paper can be opened using a PDF-viewer program on your computer. 1 Connect the computer to the Digital Paper. 2 Launch the Digital Paper App on the computer. 3 Double-click on the document you want to display. The computer will launch a PDF-viewer program and display the document as read only.
Help Guide Digital Paper System DPT-RP1 Handwriting on a document 1 Use the pen to write directly on the page. Just like when using a normal pen and paper, you can lay the side of your palm flat against the screen as you write. To change the pen type Tap anywhere on the screen of a document to display the tool bar. Then, tap document screen and select an item for [Pen Color] or [Pen Thickness].
Help Guide Digital Paper System DPT-RP1 Adding a highlight 1 Trace the text while pressing the highlight button (a) on the pen. Note Highlights cannot be added to the following.
Help Guide Digital Paper System DPT-RP1 Using the eraser 1 Select handwriting or highlights by passing over them with the pen while holding down the eraser button (a), and then lift the pen from the screen. The handwriting or highlights that were passed over will be erased. The eraser for the Digital Paper can erase the entirety of a line by selecting only a portion of it. It is not necessary to select the complete area that you want to erase, as you would when erasing pencil marks from normal paper.
To change the size of the eraser Tap anywhere on the screen of a document to display the tool bar. Then, tap document screen and select an item for [Eraser Size].
Help Guide Digital Paper System DPT-RP1 Copying/cutting and moving handwritten items You can copy, cut, and move handwritten items in the Digital Paper. 1 Tap anywhere in the document screen containing handwritten items you want to copy/cut to display the toolbar. 2 Tap (option) in the upper right of the document screen — [Area Selection]. The screen changes to the area selection mode screen. You cannot turn the page in the area selection mode screen.
Note The paste operation is only available once. The (Paste) icon disappears after pasting once. If you restart the Digital Paper, the [Copy]/[Cut] content is lost. If you [Copy]/[Cut] a new item, the previously selected content is overwritten.
Help Guide Digital Paper System DPT-RP1 Displaying the annotation list Handwritten annotations and highlighted sections can be displayed in a list and searched for in pages. 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap 3 Tap the [Handwriting List] tab or the [Highlight List] tab. 4 Tap one item from the list. (option) in the upper right of the document screen — [Annotation List]. The page that you tapped will be displayed.
Help Guide Digital Paper System DPT-RP1 Limiting edits to annotations Change the settings so that annotations that were made to a document outside of your Digital Paper cannot be edited. 1 Press the (home) button, and tap [Settings]. 2 Tap [Limit Editing Annotations] — [Enable]. Note The handwritten sticky notes, text sticky notes, and bookmarks that were added to a document using the former model, “DPT-S1,” cannot be edited regardless of the [Limit Editing Annotations] setting.
Help Guide Digital Paper System DPT-RP1 Calibrating the pen Set the way you hold the pen, and correct any displacement between where the pen touches the screen and where the writing appears. 1 Press the (home) button, and tap [Settings]. 2 Tap [System Settings] — [Pen Calibration]. 3 From the four variations of how to hold the pen, select the variation that most resembles your own grip, and then tap [Next]. 4 Use the pen to trace the dotted lines as you would normally write.
If the line that you drew appears displaced, tap [Recalibrate] to return to the previous screen. The line that you drew on the confirmation screen will be displayed, so correct the placement again, as you did in step 6. After you finish correcting the position, tap [Next], and trace the dotted line on the confirmation screen again. 9 When the dotted line and the line that you drew appear to line up, tap [Save].
Help Guide Digital Paper System DPT-RP1 Creating a new note There are two types of notes: “standalone notes” and “side-notes on documents.” This section explains how to create a standalone note. For how to create a side-note, see the links in “Related Topics.” 1 Press the (home) button, and tap [Create New Note]. 2 Select a template, and tap [OK]. A note is made in the Note folder under a file name that combines the name of the template with the date of creation.
Help Guide Digital Paper System DPT-RP1 Opening a note 1 Press the (home) button, and tap [All Notes]. 2 Tap the note you want to display. Hint Notes are documents (PDF files) marked with special attributes. As with documents, notes can also be opened from the All Documents list or the quick access list.
Help Guide Digital Paper System DPT-RP1 Creating a side-note on an open document There are two types of notes: “standalone notes” and “side-notes on documents.” This section explains how to create a side-note on a document. For how to create a standalone note, see the links in “Related Topics.” Hint When a one-to-one relationship is made between a side-note and a document, simply select (option) — [Open Side-Note] on the screen of the document to display the side-note alongside the document.
Hint Only one side-note can be created per document. When you want to create a side-note to replace the existing side-note, after displaying the (option) — [Create a New Side-Note for This Document]. The old side-note existing side-note in side-by-side format with the document, tap will become a standalone note. Side-notes are created as PDF files and can be handled the same way as documents.
Help Guide Digital Paper System DPT-RP1 Opening a side-note 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap (option) in the upper right of the document screen — [Open Side-Note]. Hint Side-notes are documents (PDF files) marked with special attributes. As with documents and standalone notes, they can be opened independently.
Help Guide Digital Paper System DPT-RP1 Adding/deleting a page from a note 1 Tap anywhere on the screen of a document to display the tool bar. 2 Tap (option) in the upper right of the document screen — [Insert New Page] or [Delete Current Page]. When you tap [Insert New Page], one page is inserted before the page that is currently being displayed. To add a page after the final page On the final page of the note, swipe (move your finger) in the direction that would take you to the next page.
Help Guide Digital Paper System DPT-RP1 Selecting defaults for the note template Set whether to select a template when you create a new note or to use a specific template without the option to select. 1 Press the (home) button, and tap [Settings]. 2 Tap [Note Template], then tap either your desired template or [Select template every time note is created].
Help Guide Digital Paper System DPT-RP1 Changing the settings on the Digital Paper 1 Press the (home) button, and tap [Settings]. 2 Set the individual items. Setting items [Wi-Fi] Switch the Wi-Fi function On/Off. [Wi-Fi Settings] [Keep Wi-Fi On During Sleep] When [Always enabled] or [Enabled only when plugged in] is selected, the Wi-Fi connection is maintained even when the Digital Paper enters sleep mode, and documents can be transferred and operated from the Digital Paper App.
to select--whenever a new note is created. [Screen Lock] [Screen Lock] Set a screen lock on the Digital Paper by setting a lock password between 4 to 20 alphanumeric characters and symbols in length. [Change Lock Password] Change the lock password for the Digital Paper. [NFC Card Lock Release Settings] Register a FeliCa card, FeliCa-compatible mobile phone, smartphone, etc., which can then be used to disable the screen lock on the Digital Paper.
Help Guide Digital Paper System DPT-RP1 Changing the Digital Paper settings using the Digital Paper App Use the Digital Paper App to change the settings of the Digital Paper. 1 Connect the computer to the Digital Paper. When changing the settings for the Wi-Fi network, please connect via the USB cable. 2 Launch the Digital Paper App on the computer. 3 Click [Settings], and set the individual items. Setting items [Paired Digital Paper] Display information for the Digital Paper that has been paired.
[Time format ] Set the display format for the time. [Time zone ] Set the time zone. [Auto sleep ] Set the amount of time before the Digital Paper enters sleep mode. Hint A maximum of 20 Wi-Fi networks can be stored to a Digital Paper device. Digital Paper supports the security methods WPA2-PSK (AES) and 802.1x EAP (TLS/PEAP). See the instruction manual for your wireless router to confirm whether your router supports the same security methods.
Help Guide Digital Paper System DPT-RP1 Updating the software Information on software updates for the Digital Paper and the Digital Paper App is checked automatically via the Internet. When update information is found, a message appears on the screen of the Digital Paper App, and you can choose whether to update. When updating the software of the Digital Paper, use the supplied USB cable to connect the computer to the Digital Paper.
Help Guide Digital Paper System DPT-RP1 Setting up the Digital Paper App To transfer documents to the Digital Paper, it is necessary to install the dedicated app, “Digital Paper App,” onto your computer and to set up a connection (perform pairing) between the Digital Paper and the Digital Paper App on the computer. By installing the Digital Paper App onto multiple computers in your home or office, you can pair multiple computers with a single Digital Paper device.
If you skipped pairing during the initial setup or if you want to install the Digital Paper App onto a different computer, follow the steps below. 1 Turn on the computer and connect it to the Internet. If the Digital Paper App has already been installed on the computer, steps 1 and 2 are not necessary. Please proceed to step 3. 2 Download the Digital Paper App from the customer support website, and install it onto the computer.
Help Guide Digital Paper System DPT-RP1 Cannot turn on the power If the charge indicator blinks three times in red when the (power) button is pressed, the battery is depleted. Connect the Digital Paper to a computer using the supplied USB cable to charge it. When the battery is entirely empty, the Digital Paper cannot turn on. If you connect the Digital Paper to a computer using the supplied USB cable and charge it, the Digital Paper will turn on.
Help Guide Digital Paper System DPT-RP1 Cannot charge the Digital Paper Please use the supplied USB cable for charging. If you use a USB cable other than the one supplied, the performance and safety are not guaranteed. Use the supplied USB cable to connect the computer directly to the Digital Paper. If connecting to the computer through a USB hub, functionality is not guaranteed. When connected to a computer for charging, make sure that the computer is turned on.
Help Guide Digital Paper System DPT-RP1 The battery seems to drain quickly Check whether the battery finished charging completely. Press the (home) button to display the battery icon in the top to , charging is complete. right corner of the home menu. When the icon changes from When using the Digital Paper in an ambient temperature lower than 5 °C (41°F), the battery may drain quickly, but this is not a malfunction. The battery drains even when the Digital Paper is in sleep mode.
Help Guide Digital Paper System DPT-RP1 It takes time for a screen to be displayed When using the Digital Paper in a cold environment, it may take time for the display to function.
Help Guide Digital Paper System DPT-RP1 The screen is not appearing If the screen is not appearing and does not react to the power button, pen, or other operations, reset the Digital Paper. Use a (power) button (a) to turn the thin item, such as a pin or paper clip, to press the RESET (reset) button (b). Then, press the power back on. Be aware that resetting the Digital Paper may erase device settings, document annotations, and note contents.
Help Guide Digital Paper System DPT-RP1 The touch panel is reacting slowly The screen may be dirty: use a soft cloth (e.g., an eyeglass cleaning cloth) to wipe off the screen.
Help Guide Digital Paper System DPT-RP1 Pen does not work The pen may stop working if the battery level is low. Connect the pen to a computer using the supplied USB cable to charge it. The charge indicator (a) lights up in red while charging. When connecting the USB cable, use caution not to press the tip of the pen. If the tip of the pen is pressed while connecting the USB cable, the pen operations will not work. In this case, disconnect and reconnect the USB cable.
Help Guide Digital Paper System DPT-RP1 The position of the pen tip is not aligned with the actual writing The pen may need to be calibrated if the actual writing or tapping is not aligned with the pen tip. Press the button, and tap [Settings] — [System Settings] — [Pen Calibration].
Help Guide Digital Paper System DPT-RP1 Cannot set up/connect to a network The [Saved Network List] displays a list of Wi-Fi networks that have been added to the Digital Paper App. If the Wi-Fi network that you want to connect to is not displayed in the [Saved Network List], use the Digital Paper App to add the Wi-Fi network. 1. Use the supplied USB cable to connect the computer to the Digital Paper, and launch the Digital Paper App. 2.
Help Guide Digital Paper System DPT-RP1 The network connection suddenly stopped working If the battery of the Digital Paper is low, it may not be able to connect to a Wi-Fi network. Charge the Digital Paper before connecting it to a Wi-Fi network. Confirm that your wireless router is within the communication range. (home) button, and then tap [Settings] — [Wi-Fi Settings] — the SSID of an Connect to an available network. Press the available Wi-Fi network.
Help Guide Digital Paper System DPT-RP1 Cannot display a document Only PDF files that conform to the specifications of PDF 1.7 can be displayed. PDF files that contain the extended functions of Adobe extension level 1-8 are not supported.
Help Guide Digital Paper System DPT-RP1 Characters are not being displayed User-defined text and some special symbols may not be displayed.
Help Guide Digital Paper System DPT-RP1 Cannot add annotations Annotations cannot be made if the pen battery is too low. Please charge the pen. Annotations cannot be made while a document is being saved. When there is limited free space in system storage, documents will open as “Read-Only,” and annotations cannot be made. Delete unnecessary documents to increase the amount of free space.
Help Guide Digital Paper System DPT-RP1 Cannot edit or delete annotations When [Limit Editing Annotations] is set to [Enable], annotations that were made outside of your Digital Paper cannot be edited. (home) button and tap [Settings], then change [Limit Editing To make these annotations editable, press the Annotations] to [Disable]. The handwritten sticky notes, text sticky notes, and bookmarks that were added to a document using the former model, “DPTS1,” cannot be edited.
Help Guide Digital Paper System DPT-RP1 The computer does not recognize the Digital Paper It may take time for the Digital Paper to be recognized. Please use the supplied USB cable. If you use a USB cable other than the one supplied, the performance and safety are not guaranteed. Use the supplied USB cable to connect the computer directly to the Digital Paper. If connecting to the computer through a USB hub, functionality is not guaranteed. The USB terminal that the cable is connected to may be broken.
Help Guide Digital Paper System DPT-RP1 Cannot transfer documents from a computer to the Digital Paper The amount of free space in the system storage of the Digital Paper may be insufficient. Check the capacity of the Digital Paper in the top left area of the Digital Paper App screen. When the amount of free space is insufficient, use the Digital Paper App to delete any unnecessary data.
Help Guide Digital Paper System DPT-RP1 Precautions Safety Handling the device If the device causes interference to radio or television reception, turn the device off and move it away from the radio or television. Refrain from using the device in an aircraft according to the inflight announcements during taking off or landing. When you put the device into a bag, make sure no objects with sharp or hard edges come into direct contact with the device.
Do not use the device in humid locations or bad weather, such as in the rain or snow. Do not get the device wet. If you touch the device with wet hands, or put it in a damp article of clothing, the device may get wet and this may cause a malfunction. Charging the device Heat may build up in the device while charging, or if it is used for an extended period of time. Use the supplied USB cable only. Do not use any other USB cable. Never wrap the device in anything when it is being charged.
by WFA (Wi-Fi Alliance). Wireless feature Turn off the wireless feature of the device when you are in a location where radio communications are prohibited. You must obtain permission from the appropriate authorities before enabling the wireless feature in such places. Turn off the wireless feature in health care facilities where any regulations posted in such areas instruct you to do so.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This DPT-RP1 has been tested and meets the FCC RF exposure guidelines when used with the Sony Corporation accessories supplied or designated for this product.
Help Guide Digital Paper System DPT-RP1 Legal Notice Copyright laws prohibit copying the data of this product or the contents of this Help Guide (illustrations, related documents, etc.) in whole or in part without the permission of the copyright holder. Additionally, use of the data of this product or the contents of this Help Guide is not allowed without Sony’s permission except for personal use. Sony, the Sony logo are either trademarks or registered trademarks of Sony Corporation.
Help Guide Digital Paper System DPT-RP1 Specifications Specifications Model DPT-RP1 Basic information Display 338 mm (13.3 in) diagonal electrophoretic display 1650 × 2200 pixel resolution 16-level gray scale Touchscreen Projected capacitive touchscreen capable of pen input Internal memory capacity/User available capacity 16 GB/Approx. 11 GB Number of PDF files that can be stored in the internal memory Approx. 10,000 files (One approx.
Wi-Fi authentication Supported Bluetooth Communication method Bluetooth Ver4.2 Frequency band 2.4 GHz band NFC *4 Frequency bands 13.56 MHz band Dimensions/Mass Dimensions (w/h/d) Approx. 224 mm × 302.6 mm × 5.9 mm (8 7/8 in × 12 in × 1/4 in) Mass (including battery) Approx. 349 g (12.3 oz) Stylus Battery Built-in rechargeable battery USB-based charging time Approx. 3 hours Non-included AC adapter-based charging time (Recommended AC adapter: AC-UUD12) Approx.
computer. OS * Microsoft Windows 10 (32/64 bit) Windows 10 Home Windows 10 Pro Microsoft Windows 8.1 (32/64 bit) Windows 8.1 Windows 8.1 Pro Microsoft Windows 7 (32/64 bit) Windows 7 Home Premium (SP1 and later) Windows 7 Professional (SP1 and later) Windows 7 Ultimate (SP1 and later) macOS 10.12(Sierra) Mac OS X 10.11 (El Capitan) 10.10 (Yosemite) CPU Intel Core™ 2 Duo 2.
