Help Guide

Do not use the device in humid locations or bad weather, such as in the rain or snow.
Do not get the device wet.
If you touch the device with wet hands, or put it in a damp article of clothing, the device may get wet and this may cause a
malfunction.
Charging the device
Heat may build up in the device while charging, or if it is used for an extended period of time.
Use the supplied USB cable only. Do not use any other USB cable.
Never wrap the device in anything when it is being charged. Heat build-up in the device may cause malfunction or damage.
If the battery lasts only half the normal time even after being fully charged, it may be reaching the end of its life.
Cleaning the device
Clean the device with a soft cloth, such as a cleaning cloth for eyeglasses. Make sure that there is no dust or dirt on the soft
cloth, as the device may be damaged.
Do not use any type of abrasive pad, scouring powder or solvent, such as alcohol or benzene, as it may mar the finish of the
case.
Wipe the pen with a dry cloth when it gets dirty. Tapping or dragging on the touchscreen using a dirty pen may damage the
surface.
Be sure to keep the device away from water or spills.
Regulatory information
This device displays the information below.
The Declaration of Conformity (DoC) logo and the FCC Identifier (FCC ID) based on the FCC Rules
The VCCI mark based on RULES FOR VOLUNTARY CONTROL MEASURES
The marks and registration numbers of the radio wave and radio communication acts
You can view these marks or registration numbers on the Digital Paper: press the
(home) button, then tap [Settings] —
[Regulatory Information].
If you cannot display the marks or registration numbers due to a malfunction, contact the Sony Support Center.
End User License Agreement
You can display the End User License Agreement from the [Settings].
Press the
(home) button, then tap [Settings] — [System Information] — [End User License Agreement].
Display
The display is made of thin, lightweight plastic film. When the device is illuminated, distortion of the plastic film may occur. This
is not a malfunction.
Do not apply excessive pressure to the touchscreen. The color or brightness may become uneven and may cause the device
to malfunction.
When using the device in a cold environment, the screen may change at a slower speed. This is not a malfunction.
Wi-Fi connectivity
The Wireless LAN functionality has passed Wi-Fi certification and complies with the interoperability specifications established
91