3-268-834-11(1) Wireless Stereo Headset Operating Instructions DR-BT22 © 2007 Sony Corporation 01GB00COV-CEK.
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
What is Bluetooth wireless technology? Bluetooth™ wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses Bluetooth wireless technology. • Enjoy music wirelessly with Bluetooth music player such as Bluetooth mobile phone, Bluetooth digital music player, or digital music player connected to the Bluetooth transmitter.*1 • Hands-free conversation can be enjoyed on your Bluetooth mobile phone without taking it out of your bag.
3 steps to Bluetooth function Pairing First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth mobile phone, etc. Wireless Stereo Headset Pairing c Page 11 V V Listening to music Calling Bluetooth connection Bluetooth connection Operate the Bluetooth device to make the Bluetooth connection.
GETTING STARTED Location and Function of Parts qg qf L R 7 8 9 0 qd qs qa 1 R (right) indication 2 Right (R) unit 3 Multi function button Controls various call functions. 4 POWER button 5 Microphone 6 RESET button Push this button when this unit does not operate properly. Pairing information is not deleted by this operation. 7 VOL (volume) +*⁄– buttons 8 Indicator (blue) Indicates the communication status of the unit. 01GB03GET-CEK.
Folding and unfolding the headset Unfolding Folding 1 Unfold the left unit of 1 Hold near the foldable the headband as illustrated. part with both hands and lift up the right unit to fold it as illustrated. 2 Expand the center part of the headband. 2 Close the center part of the headband. 3 Unfold the right unit of the headband. 3 Fold the left unit of the headband. Notes • Do not pull open this way. • Be careful not to hit your face or eyes with the top of the headband. 8 01GB03GET-CEK.
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied 2 Make sure that indicator AC power adaptor to the DC IN 3 V jack on the unit. To an AC outlet (red) lights up while charging. Wireless Stereo Headset To DC IN 3 V jack AC power adaptor (supplied) When the AC power adaptor is connected to an AC outlet, charging starts.
Notes • If the battery is not used for a long time, battery may be quickly depleted, however, after a few recharges, battery life will improve. • If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery. • Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave in a car parked in the sun.
Pairing What is pairing? Procedures of pairing Bluetooth devices need to be “paired” with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit is paired with 9 or more devices.
3 Perform pairing 6 Start the Bluetooth procedure on the Bluetooth device to detect this unit. connection from the Bluetooth device. The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as “DR-BT22.” If “DR-BT22” is not displayed, repeat from step 1. Notes • For details, refer to the operating instructions supplied with the Bluetooth device.
Wearing the headset 1 Unfold the headset according to the procedures on page 8, then extend the headset to adjust the length. 2 Put the unit with L indication on your left ear and R indication on your right ear, then place the headset over your head. 13 01GB03GET-CEK.
Indications of Bluetooth function B : Indicator (blue) R : Indicator (red) B R Connectable – – B R – – – – – – – – – ... Connecting B R – – – – – – – – – – – – – – – – – – – – ... ... Phone Music Connected Pairing Flashing patterns Searching Connecting Status HFP/HSP or A2DP B (standby for receiving audio signal) – – – – – – – – – – – – – – – ... – ... – – – – – – – – – – – – – – ... – – R – HFP/HSP and A2DP B – – – – – – – – – – ...
OPERATING THE UNIT Listening to music When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 20. VOL + button VOL – button POWER button 2 Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit. Check the following before operating the unit. – The Bluetooth device is turned on. – Pairing of this unit and the Bluetooth device is complete.
To adjust the volume Press the VOL + or – button while listening to the music. Tips • Depending on the connected device, it may be necessary to adjust the volume on the connected device as well. • Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change.
Calling When this unit does not connect to a Bluetooth mobile phone automatically VOL + button You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. VOL – button Multi function button POWER button Check the following before operating the unit. – The Bluetooth function is active on the mobile phone. – Pairing of this unit and the Bluetooth mobile phone is complete.
B To make a connection with the last connected Bluetooth device by operating this unit 1 Press the multi function button. – ring tone set on the unit – ring tone set on the mobile phone – ring tone set on the mobile phone only for Bluetooth connection Note When listening to music with this unit, a Bluetooth connection cannot be made with the multi function button. If you received a call by pressing the button on the Bluetooth mobile phone, some Bluetooth mobile phones may have handset use priority.
Controlling the Bluetooth mobile phone – HFP, HSP The operation of the buttons on this unit varies depending on your mobile phone. HFP (Hands-free Profile) or HSP (Headset Profile) is used for Bluetooth mobile phone. Refer to the operating instructions supplied with your Bluetooth mobile phone on supported Bluetooth profiles or how to operate. *1 Some functions may not be supported depending on the Bluetooth mobile phone. Refer to the operating instructions supplied with your mobile phone.
Calling while playing back music The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make a call while playing back music. For example, to make a call using a Bluetooth mobile phone while listening to music on a Bluetooth compatible music player, this unit needs to be connected to the mobile phone using HFP or HSP. Make a Bluetooth connection between this unit and the device in use following the procedures outlined below.
ADDITIONAL INFORMATION Disposing of the unit This unit has a Lithium-lon rechargeable battery built in the left unit. For environmental conservation, be sure to remove the built-in rechargeable battery from the unit before disposing, and dispose of the battery appropriately. 1 Remove the ear pad on the left unit, and then detach the left unit. The unit is fixed with claws (3 places). As illustrated, insert an object such as flathead screwdriver into the gap and lift up the unit to detach it.
Precautions On Bluetooth communication • Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. • The aerial of this unit is built into the right unit as illustrated in the dotted line. The sensitivity of Bluetooth communication will improve by placing a connected Bluetooth device on your right side.
On the supplied AC power adaptor • Use the AC power adaptor supplied with this unit. Do not use any other AC power adaptor since it may cause the unit to malfunction. • The ear pads are consumable. They may deteriorate due to long-term storage or use. Replace with new ones if they are damaged. • If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.
Troubleshooting If you run into any problems using this unit, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer. Common The unit is not turned on. , Charge the battery of the unit. , The unit is not turned on while charging. Unplug the unit from AC power adaptor and then turn on the unit. Pairing cannot be done. The correspondence distance is short. (Sound skips.
, Check that the volume of the unit is not set too low. , Turn up the volume on the connected device if necessary. , Pair this unit and Bluetooth device again (page 11). Low sound level , Turn up the volume of this unit. , Turn up the volume on the connected device if necessary. Low sound quality , Switch the Bluetooth connection to A2DP (Advanced Audio Distribution Profile) when HSP (Headset Profile) is set. Cannot make the Bluetooth connection from Bluetooth device to this unit.
Initializing the unit You can reset this unit to its default (such as volume setting) and delete all pairing information. 1 If this unit is turned on, press and hold the POWER button for about 3 seconds to turn off this unit. 2 Press and hold the POWER button and multi function button together for about 7 seconds. The indicator (blue) and indicator (red) flash together four times, and this unit is reset to the default setting. All pairing information is deleted. 26 01GB05ADD-CEK.
Specifications General Headset Communication System Bluetooth Specification version 2.0 Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft) *1 Frequency band 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Modulation method FHSS Mass Approx. 78 g (2.8 oz) Rated power consumption 1.
Printed in Malaysia DR-BT22_CEK, CED [GB] 3-268-834-11(1) 01GB06BCO-CEK.
