Help Guide (Web manual)

End Trigger
End Trigger Half
(A): The point when the MOVIE button is pressed
(B): Recorded section
(C): Recording to memory card in progress (You cannot start the next session of shooting.)
(D): Buffering in progress
To redo shooting
You can cancel recording by selecting [Cancel] on the screen. However, the movie recorded up to the point you
cancelled will be saved.
Playback speed
The playback speed will vary as below depending on the assigned [
Frame Rate] and [ Record Setting].
[
Priority Setting] and shooting duration
Frame Rate
Record Setting
24p 50M* 30p 50M/25p 50M 60p 50M/50p 50M
240fps/250fps 10 times slower 8 times slower/10 times slower 4 times slower/5 times slower
480fps/500fps 20 times slower 16 times slower/20 times slower 8 times slower/10 times slower
960fps/1000fps 40 times slower 32 times slower/40 times slower 16 times slower/20 times slower
Only when [NTSC/PAL Selector] is set to NTSC.
*
Priority
Setting
Frame
Rate
Effective pixel number read out from
image sensor
Shooting duration
Quality Priority
240fps/250fps 1824×1026 Approx. 4 seconds
480fps/500fps 1824×616
Approx. 3 seconds
960fps/1000fps 1244×420
Shoot Time
Priority
240fps/250fps 1824×616 Approx. 7 seconds
480fps/500fps 1292×436
Approx. 7 seconds/Approx. 6
seconds
214