User Manual

112
DSC-P32
4.0 cm (1.6 type) TFT drive
Total number of dots
DSC-P72
123 200 (560×220) dots
DSC-P52
61 600 (280×220) dots
DSC-P32
61 600 (280×220) dots
[Power, general]
Power AA nickel hydride batteries (2)
2.4 V
AC-LS5 AC Adaptor
(not supplied), 4.2 V
Power consumption (when recording)
DSC-P72
1.7W
DSC-P52
1.6W
DSC-P32
1.7W
Operating temperature range
0° to +40°C (32° to +104°F)
Storage temperature range
−20° to +60°C (−4° to +140°F)
Dimensions DSC-P72
119.5 × 57.7 × 32.6 mm
(4
3
/
4
× 2
3
/
8
× 1
5
/
16
inches)
DSC-P52
123.2 × 57.7 × 52 mm
(4
7
/
8
× 2
3
/
8
× 2
1
/
8
inches)
DSC-P32
101.3 × 57.7 × 32.6 mm
(4 × 2
3
/
8
× 1
5
/
16
inches)
(W/H/D, protruding portions not
included)
Mass DSC-P72
Approx. 259 g (9.1 oz) (two
batteries, “Memory Stick” and wrist
strap included)
DSC-P52
Approx. 280 g (9.9 oz) (two
batteries, “Memory Stick” and wrist
strap included)
DSC-P32
Approx. 217 g (7.7 oz) (two
batteries, “Memory Stick” and wrist
strap included)
Microphone Electret condenser microphone
Speaker Dynamic speaker
• Exif print Compatible
PRINT image matching II
Compatible
x BC-CS2A/CS2B Ni-MH battery
charger
Power requirements
AC 100 to 240V 50/60Hz
3 W
Output voltage
AA : DC 1.4 V 400 mA × 2
AAA : DC 1.4 V 160 mA × 2
Operating temperature range
0° to +40°C (32° to +104°F)
Dimensions 71 × 30 × 91 mm
(2
7
/
8
× 1
3
/
16
× 3
5
/
8
inches) (W/H/
D)
Mass Approx. 90 g (3 oz)
x AC-LS5 AC Adaptor (not supplied)
Power requirements
AC 100 to 240 V, 50/60 Hz
11 W 0.16 to 0.09 A
Rated output voltage
DC 4.2 V, 1.5 A
Operating temperature range
0° to +40°C (32° to +104°F)
Storage temperature range
−20° to +60°C (−4° to +140°F)
Maximum dimensions
Approx. 48 × 29 × 81 mm (1
15
/
16
×
1
3
/
16
× 3
1
/
4
inches) (W/H/D)
Mass Approx. 130 g (5 oz)
Accessories
• HR6 (size AA) Ni-MH batteries (2)
• Battery case
• BC-CS2A/CS2B Ni-MH Battery charger (1)
• Power cord (mains lead) (1)
• USB cable (1)
• A/V connecting cable (1)
• Wrist strap (1)
• “Memory Stick” (16MB) (1)
• CD-ROM (USB driver: SPVD-010) (1)
• Operating Instructions (1)
Design and specifications are subject to change
without notice.