User's Manual

11
The following settings are also available.
Group control settings: Changes the setting of each
respective button for all the receiver channels displayed in
the status viewer at one time.
This does not appear under factory default settings.
All muting: Enables audio output muting for all the
receiver channels displayed in the status viewer.
All unmuting: Disables audio output muting for all the
receiver channels displayed in the status viewer.
Clear AF Peak hold: Releases the hold status of the AF
level meters that appear in the status viewer.
For details, see “[Other settings] Window” on page 59.
You can select whether to display or hide [All muting],
[All unmuting], and [Clear AF Peak hold] in the [Display
settings] window.
For details, see “[Display settings] Window” on page 56.
d [Device List] window
Lists the receivers, RMU-01 units, and battery chargers
that exist on the network.
The devices in the list can be registered to the status viewer
for monitoring, or controlled by opening their [Property]
windows.
For details, see “[Device List] Window” on page 25.
e Sub window
Consists of the following tabs:
[Message Log] tab
Displays warnings and error messages that occurred for
devices. The warnings and error messages that appear here
are automatically saved as log files.
For details, see “[Message Log] Tab” on page 31.
[Property List] tab
Displays a list of setting values for multiple receivers and
transmitters. The devices displayed here are those that are
registered to the pages displayed in the status viewer. You
can control the receivers and transmitters by selecting the
cells in the list and modifying the settings.
For details, see “[Property List] Tab” on page 32.
[RF Chart Grapher] tab
Records the signal reception status obtained from the
receivers and up to 24 hours worth of warnings related to
the reception status.
For details, see “[RF Chart Grapher] Tab” on page 34.
[RF Chart Analyzer] tab
Allows you to view the information saved in the RF Chart
Grapher tab.
For details, see “[RF Chart Analyzer] Tab” on page 39.
[Spectrum Analyzer] tab
Allows you to confirm the signal reception status of the
used frequency bands obtained from the receivers.
For details, see “[Spectrum Analyzer] Tab” on page 39.
[Simple Status Viewer] tab
Allows you to narrow down the receiver channel
information registered to each status viewer page to a
certain few items, such as the RF meter, QL meter, and
alerts, and display only those items.
For details, see “[Simple Status Viewer] Tab” on page 42.
[BC-DWX Viewer] tab
Allows you to monitor the charging statuses of the battery
chargers on the network and control the charge mode.
For details, see “[BC-DWX Viewer] Tab” on page 44.
Note