User's Manual

5
The [Property List] tab allows you to display the settings
of multiple receivers and transmitters in a list, and perform
fast control operations such as applying the same settings
to all the devices simultaneously.
Recalling stored settings and monitoring
information
Information such as the setting values of devices and the
arrangement of devices in the status viewer can be saved
as a file.
You can recall such information in Wireless Studio at a
later time by loading these stored files.
The setting values recalled in Wireless Studio can be
applied to all the devices.
Pairing-assist function
The software includes a pairing wizard to assist in pairing,
an operation that is necessary to enable remote control of
transmitters via wireless remote control.
Save and analyze functions for signal
environment timelines
The [RF Chart Grapher] function allows you to monitor
and save the signal environment and alert information on a
timeline, and the [RF Chart Analyzer] function allows you
to reference the files saved with the [RF Chart Grapher].
Save and analyze functions for all frequency
band signal environments
The [Spectrum Analyzer] function allows you to use the
receivers to perform scanning. The scanning results are
displayed as a graph, allowing you to visually confirm the
existence of interference on frequency bands. The
scanning results can be saved as a file which can be used
when comparing scanning results.
Preparing the Software
and Devices
System Requirements
A computer that meets the following requirements is
required to run Wireless Studio.
Recommended specifications
The recommended specifications for the computer based
on the number of displays and the number of connected
digital wireless receivers are as follows.
Refer to this when preparing the computer to be used.
When using one display
• When up to 24 digital wireless receivers are connected
CPU: Pentium Dual-Core CPU 2.40 GHz or higher
RAM: 2 GB or higher
• When up to 32 digital wireless receivers are connected
CPU: Pentium Dual-Core CPU 2.60 GHz or higher
RAM: 2 GB or higher
• When up to 41 digital wireless receivers are connected
CPU: Pentium Dual-Core CPU 2.60 GHz or higher
RAM: 2 GB or higher
When using two displays
• When up to 24 digital wireless receivers are connected
CPU: Pentium Dual-Core CPU 2.60 GHz or higher
RAM: 2 GB or higher
• When up to 32 digital wireless receivers are connected
CPU: Pentium Dual-Core CPU 2.60 GHz or higher
RAM: 2 GB or higher
• When up to 41 digital wireless receivers are connected
CPU: Core i5 2.67 GHz or higher
RAM: 4 GB or higher
Recommended power settings
We recommend disabling sleep mode as follows on the
computer that will run Wireless Studio.
Item Requirements
OS Windows 7 (32-bit/64-bit), Windows 8 (32-bit/
64-bit), or Windows 10 (32-bit/64-bit)
CPU/RAM The recommended specifications differ
depending on the number of digital wireless
receivers connected.
Graphics
card
Video memory of 128 MB or higher is
recommended
Disk space 1 GB or more
Monitor 1024 × 768 dots or more recommended
Other English display support
100Base-TX LAN card
CD-ROM drive